2-3 weeks
Industrial RS-232/RS-422/RS-485 to M-Bus Converter.
The I-7590 is specially designed for M-Bus slave device. It is a serial bus to M-Bus convertor. First, for serial bus, it offers RS-232, RS-422 and RS-485 three kinds of communication way. Second, the I-7590 has two rotary switches, one for serial port baud and the other for M-Bus port baud. Third, the I-7590 uses transparent transmission between serial bus and M-Bus communication. Through these three designs, it is easy to communicate with any standard M-Bus slave.
Features:
- Serial Baud and M-Bus Baud can be configured separately
- Provides 10 kinds of Baud for default, 6 kinds of Baud for user-defined
- Supports up to 100 M-Bus slaves
- Bias resistors of RS-422 and RS-485 adjust by switch
- Allows updating firmware by the RS-232 port
- Overcurrent and short-circuit protection on the M-Bus port
- 3750 Vrms optoisolation on the M-Bus port
- Build-in switch for 120 Ω terminator resistor
- ±4 kV ESD to contact
- Maximum power consumption at converter start-up: 30W
- DIN-Rail mount
Manufacturer's warranty: 12 months
General technical parameters | |
Serial port | 1x RS-232/422/485 |
M-Bus master | up to 100 slaves |
Protocol support | M-Bus |
Industrial grade | |
Optoisolation | 3750Vrms |
Operating temperature | -25°C to 75°C |
Input voltage | 10~30VDC |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!