HD67024-B2-40
3-4 days
Industrial MBus to USB converter, master MBus up to 40 slaves, DIN rali mount, housing type B (wide), DIN rail mount.
This series allows to read/write MBus Slaves by USB, ensuring galvanic isolation between MBus and USB. HD67024 is a configurable device with logic inside and it allows to connect up to 40 MBus Slaves to USB. Converter is easy to configure thanks to free SW67024 software.
Configuration:
Thanks to SW67024 software on your PC you can:
- Define the communication parameters of USB
- Define the communication parameters of MBus
- Update Firmware
Characteristics:
- Galvanic isolation between USB and MBus
- Baud Rate and Parity changeable with software
- Mountable on 35mm DIN Rail
Specifications:
- Ports: 1x MBus Master; 1x USB
- Data Rates MBus: Up to 38400 bps
- MBus Connector: Terminal block
- USB Connector: Type B
- Power supply: 15...21V AC; 18...35V DC
- Operating temperature: -40°C/+70°C (-40°F/+158°F)
- Dimensions: 71 mm x 60 mm x 95 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: DIN Rail mount
- Maximum power consumption at converter start-up: 30W
- Software: SW67024
- ORDER CODE: HD67024-B2-40
Configurator - Software SW67024 FREE DOWNLOAD
Manufacturer's warranty: 24 months
MBus (Meter-Bus) is an European standard for remote reading of wide range of consumption meters. As long as MBus has both physical and application layer in most cases there is a need for external protocol/electrical layer converter to read MBus meter. Converters with MBus interface are used to read the data from gas meters, energy meters, water meters and others.
General technical parameters | |
USB | 1x USB 2.0 |
M-Bus master | up to 40 slaves |
Protocol support | M-Bus |
Industrial grade | |
Operating temperature | -40°C to 70°C |
Input voltage | 15~21VAC, 18~35VDC |
Manufacturer's warranty | 24 months |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!