Menu
Your Cart

HD67138-A1

HD67138-A1
3-4 days
HD67138-A1
  • Stock: 3-4 days
  • Brand: ADF Web
  • Model: HD67138-A1
1 328,90 zł

Industrial DeviceNet Slave to Modbus RTU Slave converter, housing type A (slim), DIN rail mount.

HD67138 allows you to connect a DeviceNet Master with a Modbus Master (for example a PLC, HMI, etc.) in order to exchange the informations between the networks. Converter is easy to configure thanks to free SW67138 software.

Configuration:

Thanks to the SW67138 software on your PC you can:

  • Define the parameters of Modbus line
  • Define the parameters of DeviceNet line
  • Define the read/write registers
  • Update the Firmware and/or the Project

Characteristics:

  • Up to 455 bytes in reading and 455 bytes in writing on DeviceNet side
  • Electrical isolation between two buses
  • Bi-directional information exchange between the DeviceNet bus and Modbus
  • 35mm DIN rail mount

Specifications:

  • Ports: 1x RS232; 1x RS485; 1x CAN
  • Connector: Terminal Block
  • Data Rates Modbus: Up to 115200 bps
  • Power supply: 8~19VAC; 8~35VDC
  • Operating temperature: -40°C to +85°C (-40°F to +185°F)
  • Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
  • Weight: 200g approx
  • Mechanical fixing: DIN Rail mount
  • Software: SW67138
  • ORDER CODE: HD67138-A1

Configurator - Software SW67138 FREE DOWNLOAD

Manufacturer's warranty: 24 months


General technical parameters
CAN ports 1x CAN
Serial port 1x RS-232, 1x RS-485
Protocol support DeviceNet, Modbus RTU
Industrial grade
Operating temperature -40°C to 85°C
Input voltage 8~19VAC, 8~35VDC
Manufacturer's warranty 24 months
Mount DIN rail

Write a review

Note: HTML is not translated!
Bad Good
1

We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!

We use cookies to offer you the best experience on our site. By continuing to browse the site, You are agree to use cookies.