3-4 days
Industrial Modbus Slave to Modbus Slave Converter, housing type A (slim), DIN rail mount.
The HD67147-A1 is Modbus Slave / Modbus Slave - Converter, it allows to share informations between two Modbus Masters.
Configuration:
Thanks to the SW67147 software on your PC you can:
- Define the parameters of the Modbus (RS485 Port 0)
- Define the parameters of the Modbus (RS485 Port 1 or RS232)
- Define the Offset of Modbus Register and Status
Characteristics:
- Galvanic isolation between the two Modbus ports
- 35mm DIN rail mount
- Up to 4000 Modbus Register
- Up to 4000 Modbus Status
Specificactions:
- Ports: 1x RS232; 2x RS485
- Data Rates RS232: Up to 115200 bit/s
- Data Rates RS485: Up to 115200 bit/s
- RS232 connector: D-SUB9
- RS485 connector: 5mm terminal block
- Power supply Connector: Terminal Block
- Power supply: 8~19VAC; 8~35VDC
- Operating temperature: -40°C to +85°C (-40°F to +185°F)
- Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: 35mm DIN Rail mount
- Software: SW67147
- ORDER CODE: HD67147-A1
Configurator - Software SW67147 FREE DOWNLOAD
Manufacturer's warranty: 24 months
General technical parameters | |
Serial port | 1x RS-232, 1x RS-485 |
Protocol support | Modbus RTU |
Industrial grade | |
Operating temperature | -40°C to 85°C |
Input voltage | 8~19VAC, 8~35VDC |
Manufacturer's warranty | 24 months |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!