3-4 days
Industrial CAN to Modbus TCP slave converter, housing type A (slim), DIN rail mount.
HD67515 allows you to connect a CAN network with a Modbus TCP Master (for example a PLC, SCADA system, etc) in order to exchange informations between the networks. Converter is easy to configure thanks to free SW67514 software.
Configuration:
Thanks to the SW67515 software on your PC you can:
- Define the parameters of Modbus TCP line
- Define the parameters of CAN line
- Define which CAN frames are read/written by the Modbus
Characteristics:
- Triple isolation between two buses
- Bi-directional information exchange between CAN and Modbus networks
- Read/write CAN frame from Modbus word
- Mountable on 35 mm DIN rail
Specifications:
- Ports: 1x CAN; 1x Ethernet
- CAN 2.0 connector: Terminal block
- Ethernet connector: RJ45
- Data Rates CAN: From 10K to 1Mbps
- Data Rates Modbus: 10/100 MHz Autosensing
- Power supply: 8~19VAC; 8~35VDC
- Operating temperature: -40°C to +85°C (-40°F to +185°F)
- Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: DIN Rail mount
- Software: SW67514
- ORDER CODE: HD67515-A1
Configurator – Software SW67515 FREE DOWNLOAD
General technical parameters | |
Ethernet | 1x 10/100BaseT(X) |
CAN ports | 1x CAN |
Protocol support | CAN, Modbus TCP |
Industrial grade | |
Operating temperature | -40°C to 85°C |
Input voltage | 8~24VAC, 12~35VDC |
Manufacturer's warranty | 24 months |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!