2-3 weeks
Intelligent CAN to Ethernet/Modbus TCP/Modbus RTU Converter.
The I-7540D-MTCP is helpful for data exchanging between the Modbus devices and CAN devices. I-7540D-MTCP is a Modbus TCP server and acts as slave device in Modbus RTU network. It supports four communication modes: Modbus TCP, Modbus RTU, CAN-Ethernet Convert and Pair connection.
The major function of the I-7540D-MTCP is CAN to Modbus TCP/RTU gateway. It allows Modbus TCP/RTU device to communicate with CAN device on a CAN network. I-7540D-MTCP supports the function codes 0x03/0x04/0x10 of Modbus TCP/RTU for reading and writing CAN messages.
Furthermore, The device supports a transparent, protocol-independent transfer of the CAN messages, thus allowing its implementation into a wide range of possible applications. Furthermore, the CAN-Modbus Converter can be used with various higher layer CAN protocols (e.g. CANopen, DeviceNet or other proprietary protocols). The following figure shows the application architecture for CAN-Modbus Converter.
Features:
- Ethernet Protocols, TCP, UDP, IP, ICMP, ARP
- Support both CAN specification 2.0A and 2.0B
- Max transmission speed up to 1M bps for CAN and 115.2kbps for RS-232 & RS-485
- Software configurable CAN and RS-232 communication parameters
- Web Configuration
- Support maximum 24 Ethernet clients connection
- transparent communication between the CAN devices via Ethernet
- Support 30 specific CAN IDs in the Modbus TCP/RTU mode
Manufacturer's warranty: 12 months
General technical parameters | |
Ethernet | 1x 10/100BaseT(X) |
CAN ports | 1x CAN |
Serial port | 1x RS-232, 1x RS-485 |
Protocol support | CAN, Ethernet, Modbus TCP, Modbus RTU |
Industrial grade | |
Optoisolation | 1000VDC |
Operating temperature | -25°C to 75°C |
Input voltage | 10~30VDC |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!