3-4 days
Industrial optoisolated DeviceNet slave to Modbus TCP master converter, housing type B, DIN rail mount.
HD67139 allows you to connect a DeviceNet Master net (for example an ABB PLC, etc.) with some Modbus devices. Converter is easy to configure thanks to free SW67139 software.
Configuration:
Thanks to the SW67139 software on your PC you can:
- Define the parameters of Modbus TCP line
- Define the parameters of DeviceNet line
- Define the read/write registers
- Update the Firmware and/or the Project
Characteristics:
- Up to 455 bytes in reading and 455 bytes in writing on DeviceNet side
- Electrical isolation between two buses (CAN: 2000V, Power: 2000V, Ethernet: 500V)
- Bi-directional information exchange between the DeviceNet bus and Modbus TCP
- 35mm DIN rail mount
Specifications:
- Ports: 1xEthernet; 1xDeviceNet
- Modbus TCP Connector: RJ45
- Power supply Connector: Terminal Block
- Power supply: 8~19VAC; 8~35VDC
- Operating temperature: -40°C to +85°C (-40°F to +185°F)
- Dimensions: 71x60x95 mm
- Weight: 200g approx
- Mechanical fixing: DIN Rail mount
- Software: SW67139
- ORDER CODE: HD67139-B2
Configurator - Software SW67139 FREE DOWNLOAD
Manufacturer's warranty: 24 months
Tips and inspiration from our blog
28 Jun
0
16 Feb
0
08 Feb
0
16 Feb
0
