3-4 days
Industrial Modbus TCP slave to KNX TP converter, housing type B (wide), DIN rail mount.
HD67815 allows to connect Modbus TCP masters (SCADA or PC) with KNX networ. Converter is easy to install and configure thanks to free software SW67815.
Configuration:
Thanks to the SW67815 software on your PC you can:
- Define the parameters of Modbus TCP line
- Define the parameters of KNX line
- Update the device
Characteristics:
- Up to 1440 bytes in reading and 1440 bytes in writing
- Triple isolation between KNX - Power Supply, KNX – Ethernet, Power Supply - Ethernet
- Bi-directional information exchange between KNX bus and Modbus TCP bus
- Mountable on 35mm Rail DIN
Specifications:
- Ports: 1x KNX; 1x Ethernet
- KNX protocol: KNX TP
- Modbus TCP protocol: Modbus TCP slave
- Data Rates KNX: 9600 bit/s
- Data Rates Modbus TCP: 10/100 Base-T Autosensing
- KNX connector: KNX Bus connector
- Modbus TCP connector: RJ45
- Power supply: 8...24VAC; 12...35VDC
- Power supply connector: 2way 5mm terminal block
- Operating temperature: -40°C to +85°C (-40°F to +185°F)
- Dimensions: 71 mm x 60 mm x 95 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: 35mm DIN Rail mount
- Software: SW67815
- ORDER CODE: HD67815-KNX-B2
Configurator – Software SW67815 FREE DOWNLOAD
Tips and inspiration from our blog
28 Jun
0
16 Feb
0
08 Feb
0
16 Feb
0
