HD67167-A1
3-4 days
Industrial Modbus TCP slave to SNMP agent converter, housing type A (slim), DIN rail mount.
HD67167 allows you to connect a Modbus TCP Master net (for example a PLC, SCADA System, etc) with a SNMP Manager net (for example a PC, Supervisory System, etc). Converter is easy to configure thanks to free SW67167 software.
Configuration:
Thanks to the SW67167 software on your PC you can:
- Define the parameters of SNMP line
- Define the parameters of Modbus TCP line
- Update the device
Characteristics:
- Up to 1024 bytes in reading and 1024 bytes in writing
- 35mm DIN rail mount
- Isolation between Power Supply - Ethernet
- Bi-directional information exchange between the Modbus TCP and SNMP buses
Specification:
- Ports: 2x Ethernet
- Modbus TCP protocol: Modbus TCP slave
- SNMP protocol: SNMP Agent
- Modbus TCP connector: RJ45
- SNMP connector: RJ45
- Data Rates Modbus TCP: 10/100 MHz Autosensing
- Data Rates SNMP: 10/100 MHz Autosensing
- Power supply: 8...24VAC; 12...35VDC
- Operating temperature: -40°C/+85°C (-40°F/+185°F)
- Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
- Weight: 200g approx
- DIN Rail mount
- Software: SW67167
- ORDER CODE: HD67166-A1
Configurator - Software SW67167 FREE DOWNLOAD
Manufacturer's warranty: 24 months
General technical parameters | |
Ethernet | 2x 10/100BaseT(X) |
Protocol support | Modbus TCP, SNMP |
Industrial grade | |
Operating temperature | -40°C to 85°C |
Input voltage | 8~24VAC, 12~35VDC |
Manufacturer's warranty | 24 months |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!