HD67811-KNX-B2-169MHz-80

Industrial MBus Wireless to KNX Converter, housing type B (wide), DIN rail mount. Support up to 80 MBus slaves and up to 32 MBus Wireless slaves, wMBus @ 169MHz.

The HD67811-KNX-B2-169MHz-80 allows you to connect some MBus Slaves (for example Kamstrup, Sontex, Aquametro, Siemens and so on) with a KNX net (for example light switches, actuators). Converter is easy to install and configure thanks to free software SW67811.

New converter functionality - automatic scan of MBus receivers

There is no longer need to consult the manufacturer or analyze the protocol frame from the MBus counter - everything will be handled for you our dedicated software SCAN&DECODE!

To facilitate the installation of already easy-to-use ADFweb MBus converters, the manufacturer has developed dedicated software that automatically scans the MBus and decodes all the registers contained in the telegram. In practice, this means fast installation of converters and trouble-free system setup.

SCAN&DECODE - quick manual

We have also provided you with a very brief description of the functionality, which is available for download at the CONSTEEL Electronics store documentation.

Configuration:

Thanks to the SW67811 software on your PC you can:

• Define the parameters of MBus line
• Define the parameters of MBus Wireless line
• Define the parameters of KNX line
• Define which MBus variables are readable on KNX
• Update the device

Characteristics:

• Electrical isolation between KNX and MBus/MBus Wireless
• Baud Rate and Parity (for MBus on wire) changeable with software
• Available wM-Bus frequency: 169 MHz, 433 MHz or 868 MHz (in relation to the order code)
• Mountable on 35mm Rail DIN

Specificactions:

• Ports: 1x KNX; 1x MBus; 1x MBus Wireless
• MBus protocol: MBus Master
• KNX protocol: KNX TP
• MBus Wireless frequency: 169 MHz
• Data Rate MBus: Up to 38400 bit/s
• Data Rate KNX: 9600 bit/s
• MBus Wireless connector: SMA Female Antenna
• MBus connector: 2-way 5mm terminal block
• KNX connector: KNX Bus connector
• Power supply Connector: 2-way 5mm terminal block
• Power supply: 15~21VAC; 18~35VDC
• Maximum power consumption at converter start-up: 30W
• Operating temperature: -40°C to +85°C (-40°F to +185°F)
• Dimensions: 71 mm x 60 mm x 95 mm (DxWxH)
• Weight: 200g approx
• Mechanical fixing: DIN Rail mount
• Software: SW67811
• ORDER CODE: HD67811-KNX-B2-169MHz-80

Configurator – Software SW67811 FREE DOWNLOAD

---