Converters of industry standards and protocols
This category includes industrial converters which allows to integrate devices with different protocols and communication interfaces. Industrial converters are most often used to extend existing networks and industrial structures with additional, unplanned or previously planned devices that do not always have to be compatible with the original protocol or communication standard.
Which protocols are supported by converters from our offer?
We have prepared for you all kinds of industrial converters, depending on the protocol of the communication device with which you want to integrate your system. Our offer includes BACnet IP and BACnet MSTP, CAN, DALI, DeviceNet, DMX, Ethernet, HART, J1939, KNX, Lonworks, M-Bus, Modbus RTU, Modbus TCP, NMEA 2000, PROFIBUS, PROFINET, RS-232, RS-485, LoRaWAN, USB, Fiber, TTL and SNMP converters.
For your convenience, we have divided our converters according to the technology they support. Choose the one that interests you and get to know with the available devices:
-120x120w.png){kind=logo}
-120x120w.png){kind=logo}
-120x120w.png){kind=logo}
-2-250x250w.png "NP302T-2D(RS-485)")
-1-250x250h.png "NP302T-2D(RS-485)")
Shipping 24h
Test for Free!
Brand: 3onedata
Model: NP302T-2D(RS-485)
Industrial, 2-port RS-422/485 serial device server with one Ethernet port. High performance, industrial grade 2-port serial to Ethernet server, it can satisfy some kinds of customer requirements in consumption, temperature, volume and handle ability. It provides 2 port RS-485/422 (RS-485/422 connector: 5 bit terminal block) and 1 port 10/100Base-Tx Ethernet, can focus manage disperse serial device, master through network, easy, convenience. In ap..
536,02 zł
2-3 weeks
Brand: ICPDAS
Model: tM-7520U CR
Industrial Isolated RS-232 to RS-485 Converter. The tM-7510U repeater simply amplifies, or boosts, existing RS-485 signals to enable them to cover longer distances. It extends the communication distance by 4000 ft. (1200 m) or increases the maximum number of bus nodes. The module provides 2500 VDC of isolation allowing you to separate and protect critical segments of the system from the rest of the RS- 485 network.The tM-7510U provides 2 modes of..
543,20 zł
2-3 weeks
Brand: ICPDAS
Model: I-7520 CR
Industrial Isolated RS-232 to RS-485 Converter. Most industrial computer systems provide standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential voltage lines for data and control signals, which transparently converts RS-232 signals into isolated RS-422 or RS-485 signal with no need to change an..
552,90 zł
5-10 days
Brand: 3onedata
Model: IMC100-2T1F(S)
2-port 10/100Base-T(X)+1-port 100Base-FX, Single-mode. IMC100 series are unmanaged industrial media converters. This series have 14 productsand support a variety of optional interfaces including 100M fiber ports, 100M copper ports,Gigabit fiber ports, Gigabit copper ports and Gigabit SFP. They adopt DIN-Rail mounting tomeet the requirements of different application scenes. Product supports optional AC/DC power supply. The DIP switch could imple..
567,45 zł
2-3 weeks
Brand: ICPDAS
Model: I-7520R CR
Industrial RS-232 to Isolated RS-485 Converter. Most industrial computer systems provide standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential voltage lines for data and control signals, which transparently converts RS-232 signals into isolated RS-422 or RS-485 signal with no need to change an..
572,30 zł
2-3 weeks
Brand: ICPDAS
Model: I-7520U CR
Isolated RS-232 to 4 Channels RS-485 Converter. RS-485 Active HubThe I-7520U is isolated RS-232 to 4-ch RS-485 active star wiring hub, it has 4 independent RS-485 output channels and one RS-232 input channel. Each output channel is equipped with an individual driver. The data from a master to the input channel will simultaneously be forwarded to all the four output channels.Baud Rate SettingThe I-7520U provides 2 modes of baud rate setting, one i..
596,55 zł
2-3 days
Brand: Aspar
Model: MOD-ETH
Modbus TCP/RTU/ASCII converter - Modbus Gateway with Ethernet interface. MOD-ETH is an innovative device that converts Modbus TCP to Modbus RTU / ASCII.The device has Ethernet and RS485 interface, 4 digital inputs with counters and 3 relay outputs. All inputs are isolated from logic using optocouplers.Up to 128 Modbus I / O Modules (SFAR: SLIM, MINI, STANDARD and other manufacturers) can be connected to the MOD-ETH via the RS485 interface. The da..
596,55 zł
2-3 weeks
Brand: ICPDAS
Model: tM-7561 CR
USB to Isolated RS-485 Converter. The tM-7561 is a cost-effective USB to RS-485 converter. Connecting the tM-7561 to a PC, you get one RS-485 port that allows you to access RS-485 devices through the USB interface. Like the I-7520, the tM-7561 contains "Self-Tuner" chip auto-tunes the baud rate and data format to the RS-485 network. The tM-7561 module derives its power from the USB port and doesn't need external power adapter.Features:USB 1.1/2.0..
596,55 zł
2-3 weeks
Brand: ICPDAS
Model: I-7520A CR
Industrial Isolated RS-232 to RS-422/485 Converter. Most industrial computer systems provide standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential voltage lines for data and control signals, which transparently converts RS-232 signals into isolated RS-422 or RS-485 signal with no need to chang..
625,65 zł
3-4 days
Brand: ADF Web
Model: HD67020-B2-10
MBus to RS-232 converter (Master MBus: up to 10 slaves), housing type B (wide), DIN rail mount. This series allow to read/write M-Bus Slaves devices by RS232, ensuring galvanic isolation between M-Bus and RS232. HD67020 is a Plug&Play device and it allows to connect up to 10 M-Bus Slaves to RS232. The converter does not require any configuration. The baudrate is automatically detected at RS232 side and used (the same) to the M-Bus side.Charac..
635,35 zł
2-3 weeks
Brand: ICPDAS
Model: tGW-712 CR
Industrial Modbus TCP to RTU/ASCII Converter with PoE and 1 RS-232 Port. The tGW-700 is a Modbus TCP to RTU/ASCII gateway that enables a Modbus/TCP host to communicate with serial Modbus RTU/ASCII devices through an Ethernet network, and eliminates the cable length limitation of legacy serial communication devices. The module can be used to create a pair-connection application (as well as serial-bridge or serial-tunnel application), and can then ..
635,35 zł
-P1-250x250h.png "GW1101-1D(RS-485)")
-3-250x250w.png "GW1101-1D(RS-485)")
Shipping 24h
Test for Free!
Brand: 3onedata
Model: GW1101-1D(RS-485)
Industrial Modbus RTU / ASCII gateway to Modbus TCP. Communication ports RS-485/422 and Ethernet, wide temperature range, metal housing IP40.GW1101-1D(RS-485)-TB-P(12-48VDC) is Modbus gateway designed for integrating Modbus RTU/ASCII and Modbus TCP networks; it can achieve the conversion between Modbus RTU/ASCII and Modbus TCP protocols. This product has 1 RS-485/422 serial port and 1 100M Ethernet copper port. It adopts wall mounting to meet the..
654,75 zł
