Menu
Your Cart

EIDX24MP-100T EOL

EIDX24MP-100T EOL
5-10 days
EIDX24MP-100T EOL
  • Stock: 5-10 days
  • Model: EIDX24MP-100T
0,00 zł

Industrial Managed Ethernet PoE Switch with 24 Fast Ethernet ports and wide operating temperature range from -40°C to 75°C.

The EIDXMP Series of Ethernet switches provide management functionality in situations where extended temperatures of -40°C to +75°C are expected. With a fixed width of 62 mm, these units offer 16 or 24 ports with copper and fiber/copper combinations.

Ports 9 through 16 (located on the bottom of the unit) support Power-over-Ethernet (PoE), providing data and power over one cable. The unit acts as power source equipment (PSE)-supplying up to 15.4 W per port for IEEE 802.3af-compliant powered devices (PD). PoE eliminates the need for additional power supplies for Ethernet-enabled devices placed in challenging locations-such as wireless access points or IP cameras on a ceiling or outdoors. PDs can be located up to 100 metres from the switch. In addition to the conventional features standard in Plug-and-Play switches, the EIDXMP Series offers many important managed-switch benefits. These benefits includes IGMP snooping and IGMP query, RapidRing®, VLAN, Quality of Service (QoS), port mirroring, rate limiting, trunking, port security, the Simple Network Management Protocol (SNMP), and the Rapid Spanning Tree Protocol (RSTP).

Configure the unit by web browser via any Ethernet port-or in terminal mode via the local console port. Using either of these methods, port parameters, feature configuration and device status can be monitored and/or modified. A configurable relay is present for attaching to fault-monitoring equipment.

Features:

  • 16 10/100BaseT(X) Ethernet ports and 8 10/100BaseT(X) Ethernet PoE ports
  • Extended temperature range: –40°C to +75°C
  • 8 PoE ports delliver up to 15.4W each
  • Console or web page configuration
  • Quality of Service (QoS) support (802.1p, DiffServ, TOS, Port-based, MAC-based)
  • Managed via the SNMP protocol
  • Port mirroring, rate limiting and port security

Specification:

Ethernet Communications

  • IEEE 802.3 10/100 Mbps data rate
  • 10BASE-T, 100BASE-TX physical layer, 100 m (max) CAT5 cable length
  • IEEE 802.3af PoE Power Sourcing Equipment, 100 m (max) CAT5 cable length

Console Communication

  • EIA-232 DTE (9600, 1, 1)

LEDs

  • Power: Green
  • PoE PWR:
    • 9/10 - 15/16: Green = PoE power applied; flashes when fault
    • 48V: Green = PoE bus power OK
    • Red = fault
  • Port LEDs:
    • Green = 100 Mbps link present; flashes with activity
    • Yellow = 10 Mbps link present; flashes with activity
  • Status:
    • Green = Processor status OK
    • Red = Processor status fault

Power

  • Input voltage: 48VDC (46~52VDC)
  • Input power (max): 13W with no power devices / 135W with 8 PoE devices

Envrionmental

  • Operating temperature: -40°C to 75°C
  • Storage temperature: -40°C to 85°C
  • Relative Humidity: 10–95%, non-condensing

Mechanical

  • Dimensions: 139 mm x 62 mm x 192 mm
  • IP protection: IP30
  • Mounting: Panel mount or DIN rail mount

Manufacturer's warranty: 36 months

Free BlueEyes View central network management and monitoring software. More information can be found HERE


General technical parameters
Ethernet 16x 10/100BaseT(X), 8x 10/100BaseT(X) PoE
Serial port 1x RS-232
Industrial grade
IP rating IP30
Operating temperature -40°C to 75°C
Input voltage 48VDC, 46~52VDC
Manufacturer's warranty 36 months
Mount DIN rail

Write a review

Note: HTML is not translated!
Bad Good
1

We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!

We use cookies to offer you the best experience on our site. By continuing to browse the site, You are agree to use cookies.