EIDX24MP-100TF EOL
5-10 days
EIDX24MP-100TF EOL
- Stock: 5-10 days
- Model: EIDX24MP-100TF
0,00 zł
Available Options
Industrial Managed Ethernet PoE Switch with 22 Fast Ethernet ports, 2 fibre ports and wide operating temperature range from -40°C to 75°C.
The EIDXMP Series of Ethernet switches provide management functionality in situations where extended temperatures of -40°C to +75°C are expected. With a fixed width of 62 mm, these units offer 16 or 24 ports with copper and fiber/copper combinations.
Ports 9 through 16 (located on the bottom of the unit) support Power-over-Ethernet (PoE), providing data and power over one cable. The unit acts as power source equipment (PSE)-supplying up to 15.4 W per port for IEEE 802.3af-compliant powered devices (PD). PoE eliminates the need for additional power supplies for Ethernet-enabled devices placed in challenging locations-such as wireless access points or IP cameras on a ceiling or outdoors. PDs can be located up to 100 metres from the switch.
In addition to the conventional features standard in Plug-and-Play switches, the EIDXMP Series offers many important managed-switch benefits. These benefits includes IGMP snooping and IGMP query, RapidRing®, VLAN, Quality of Service (QoS), port mirroring, rate limiting, trunking, port security, the Simple Network Management Protocol (SNMP), and the Rapid Spanning Tree Protocol (RSTP).
Configure the unit by web browser via any Ethernet port-or in terminal mode via the local console port. Using either of these methods, port parameters, feature configuration and device status can be monitored and/or modified. A configurable relay is present for attaching to fault-monitoring equipment.
Features:
- 14 10/100BaseT(X) Ethernet ports, 8 10/100BaseT(X) Ethernet PoE ports and 2 100Base-FX fibre ports
- Extended temperature range: –40°C to +75°C
- 8 PoE ports delliver up to 15.4W each
- Console or web page configuration
- Quality of Service (QoS) support (802.1p, DiffServ, TOS, Port-based, MAC-based)
- Managed via the SNMP protocol
- Port mirroring, rate limiting and port security
Specification:
Ethernet Communications
- IEEE 802.3 10/100 Mbps data rate
- 10BASE-T, 100BASE-TX physical layer, 100 m (max) CAT5 cable length
- IEEE 802.3af PoE Power Sourcing Equipment, 100 m (max) CAT5 cable length
Fibre Communications
- 100BASE-FX physical layer, 2 km (max) multimode cable
- 100BASE-FX physical layer, 15 km (max) single mode cable
Console Communication
- EIA-232 DTE (9600, 1, 1)
LEDs
- Power: Green
- PoE PWR:
- 9/10 - 15/16: Green = PoE power applied; flashes when fault
- 48V: Green = PoE bus power OK
- Red = fault
- Port LEDs:
- Green = 100 Mbps link present; flashes with activity
- Yellow = 10 Mbps link present; flashes with activity
- Status:
- Green = Processor status OK
- Red = Processor status fault
Power
- Input voltage: 48VDC (46~52VDC)
- Input power (max): 13W with no power devices / 135W with 8 PoE devices
Envrionmental
- Operating temperature: -40°C to 75°C
- Storage temperature: -40°C to 85°C
- Relative Humidity: 10–95%, non-condensing
Mechanical
- Dimensions: 139 mm x 62 mm x 192 mm
- IP protection: IP30
- Mounting: Panel mount or DIN rail mount
Manufacturer's warranty: 36 months
General technical parameters | |
Ethernet | 14x 10/100BaseT(X), 8x 10/100BaseT(X) PoE |
Serial port | 1x RS-232 |
Fiber mode | Single-mode, Multi-mode |
Fiber | 2x 10/100Base-FX |
Industrial grade | |
IP rating | IP30 |
Operating temperature | -40°C to 75°C |
Input voltage | 48VDC, 46~52VDC |
Manufacturer's warranty | 36 months |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!