ES5008G-8POE-150W

8-Port Industrial Ethernet Switch with 8 PoE ports, 230VAC power supply and operating temperature range from -20°C to 50°C.

With data and power supported by one unit, the ES5008G-8POE-150W-P(220VAC) shall reduce cables and eliminate the need for dedicated electrical outlets on the wall,ceiling or any unreachable place. Auto PoE detection and Plug and play installation makes ES5008G-8POE-150W-P(220VAC) Gigabit PoE Switch easy to use and with clear LED indicators to tell the working condition.

Features:

• Compatible with both IEEE802.3at (30W) and IEEE802.3af (15.4W)
• Automatically detect and supply power to IEEE802.3at and IEEE 802.3af compliant powered devices (PDs)
• Advanced SAFC function, only supply power to IEEE 802.3af/at compliant PDs, no worry about damaging
• Other private standard POE devices or devices without POE function
• Support port power supply prioritization, guarantee the continuous power supply of key nodes
• Up to 100m network cable transmitting distance
• Built-in PSE power supply module, plug-and play design, easy to install
• High security performance defending against power surge
• Support short-circuit protection function
• Energy-saving green design, support auto-switch to standby mode and auto-detect cable length
• Support simple WEB management, easy to configure the functions of switches

Specification:

Technology:

• Standards and Protocols: IEEE 802.3af, Power Over Ethernet, IEEE 802.3at, Power Over Ethernet Plus, IEEE 802.3u, 100BASE-TX, IEEE 802.3ab, 1000 BASE-T, IEEE 802.3z, 1000 BASE-X, IEEE 802.3ad, Static or Dynamic Link Aggregation, IEEE 802.3x, Full-Duplex Flow Control, IEEE 802.3az, EEE (Energy Efficient Ethernet), IEEE 802.1q, VLAN, IEEE 802.1p, QoS/CoS, IEEE 802.1d, STP(Spanning Tree Protocol), IEEE 802.1w, RSTP (Rapid Spanning Tree Protocol)
• POE Standard: IEEE802.3af/at
• Port Flow control: Back-pressure traffic control under Half-Duplex mode, IEEE 802.3x traffic control under Full-Duplex mode

Ports:

• Fixed ports: 8x 10/100/1000M PoE Ports
• PoE Pin-out: 1/2(+), 3/6(-); Customized 4/5(+), 7/8(-)

Exchange Properties:

• 1000M forwarding rate: 1488095pps
• 100M forwarding rate: 148809pps
• 10M forwarding rate: 14880pps
• Transmit type: Full wire-speed storage and forwarding
• MAC address: 8K, Support auto-update, two-way learning
• VLAN: Support up to 4096 VLANs, Port-based VLANs, VLANs based on IEEE 802.1q
• Switching Capacity: ≥16Gbps
• Spanning Tree:
• Spanning Tree Protocol
• Rapid Spanning Tree Protocol (RSTP)
• Link Aggregation: Support 2 aggregation groups, and a maximum of 4 ports in each aggregation group
• Port Mirroring：Support bi-direction port mirroring
• Ring Protection: Support Ring Protection, provide real-time detecting, quick alarm, precise localization, smart blocking and auto-recovery
• Port Isolation: Isolation between downlink ports without influence the communication between downlink and uplink ports
• Port Flow Control: Back-pressure traffic control under Half-Duplex mode, IEEE 802.3x traffic control under Full-Duplex mode
• Port Rate Restriction:Port-based ingress or egress rate limiting
• Jumbo Frame: Maximum support 9216Byte
• Multicast Control: Support IGMP Snooping
• Storm Suppression: Support the suppression of broadcast storm based on forwarding rate
• Security: Port-base MAC address binding, Security restriction on port-based MAC address quantity
• QOS: SP (Strict Priority), WFQ (Weighted Fair Queuing), WRR (Weighted Round Robin), 802.1p (Port Queuing Priority), Differentiated Service Code Point (DSCP Priority)
• PoE ouput priority Management: Supported

Physic Medium:

• 10/100Base-TX: UTP category 3/4/5 cables (Maximum 100m)
• 1000Base-T: UTP Category 5 cable (Maximum 100m)
• Network Cable Deployment: Support Auto-MDIX function, automatically identify straight forward cable and cross-over cable
• Negotiation Pattern: Support port auto-negotiation function (automatically negotiate transmission rate and Duplex modes)
• Maintenance: Detect the connectivity of network cables, Uploading or downloading of the configuration data, Uploading of upgrade patch, WEB-based reset to factory defaults, Support port short-circuit reset to factory defaults
• Management: Support WEB-based management

Indicator light:

• Interface light: Link/Act, POE Status
• Power light: PWR

Power:

• Input Power Supply: 90 ~ 264VAC/50 ~ 60Hz/150W
• Energy Saving: Comply with "EEE" (Energy Efficient Ethernet)

Working Environment:

• Working Temperature: -20°C ~ 50°C
• Storage Temperature: -40°C ~ 70°C
• Operation Humidity: 10% ~ 90% (non-condensing)
• Storage Humidity: 5% ~ 95% (non-condensing)

Mechanical Properties:

• Weight: <1.5kg
• Dimensions (LxWxH): 280mm x 180mm x 44mm

Warranty: 3 years

---