Menu
Your Cart

H05RN-F 300/500V

H05RN-F 300/500V
To be confirmed
H05RN-F 300/500V
0,00 €

Multi-conductor cables with insulation and rubber coating, for mobile and portable receivers.

Intended for general use in home rooms, kitchens, offices and to power equipment where cables are exposed to small mechanical stresses (eg vacuum cleaners, kitchen appliances, soldering irons, toasters) and as connection cables for garden equipment.

Construction:

  • Veins: Flexible copper class 5 according to PN-EN 60228, tinned or bare wires
  • Insulation: Ethylene-propylene rubber (EPR) type EI4 according to EN 50363-1
  • Coating: Synthetic thermosetting compound type EM2 according to EN 50363-2-1
  • Core identification (according to PN-HD 308 S2):
    • 2-wire: blue, brown
    • 3-wire: green-yellow, blue, brown
    • 4-wire: green-yellow, brown, black, gray

Characteristic:

  • Explanation of symbols: H05RN-F - Conductor made according to harmonized standard (H), for 300 / 500V (05) voltage, with rubber insulation (R) and synthetic thermosetting layer of non-spreading flame (N) with flexible conductors (F)
  • Maximum temperature of the conductor during cable operation: +90°C
  • The minimum ambient temperature for laying cables: -25°C
  • Maximum core temperature during short circuit: +250°C
  • Maximum permissible load: 15 N per mm² of copper cross-section
  • Test voltage testing: 2000V
  • The minimum bending radius:
    • Composed permanently: 3 x D
    • Connected to a portable or mobile device - Cable not mechanically loaded: 4 x D
    • With a permissible mechanical load: 6 x D
    • D - outer diameter of the wire
  • Standard packaging: In reels of 50 or 100 m and on drums of 500 or 1000 m. It is possible to offer other lengths of sections and types of packaging
  • Resistance to flame spread: PN-EN 60332-1-2

Compliant with: PN-EN 50525-2-21


Industrial grade
Operating temperature to 90°C
Cable parameters
Minimum bending radius 3D, 4D, 6D
Core Copper
Insulation Ethylene-propylene rubber (EPR)
Installation temperature -25°C to 90°C
Maximum short circuit temperature 250°C
Test voltage 2 kV
Standard packaging Discs, On drums
Coating Thermosetting compound
Resistance to flame spread EN 60332-1-2
Number of wires in the cable Multi-core
Outer diameter [mm] 6.1, 6.6, 6.7, 7.0
Cable weight [kg/km] 56, 66, 69, 78

Write a review

Note: HTML is not translated!
Bad Good

We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!

We use cookies to offer you the best experience on our site. By continuing to browse the site, You are agree to use cookies.