HD67818-KNX-B2

Industrial PROFINET slave to KNX TP converter, housing type B (wide), DIN rail mount.

HD67818 allows to connect PROFINET devices like Siemens PLC with KNX network like lighting systems to exchange the informations between the nets.

Configuration:

Thanks to the SW67818 software on your PC you can:

• Define the parameters of PROFINET line
• Define the parameters of KNX line
• Define the KNX messages that the Converter can accept
• Define the KNX frames that the Converter sends through the KNX line
• Define the map of KNX byte that must be written in the PROFINET side
• Define the map of which PROFINET I/O must be written in KNX messages
• Update the device

Characteristics:

• Up to 1440 bytes in reading and 1440 bytes in writing
• Triple isolation between KNX - Power Supply, KNX – Ethernet, Power Supply - Ethernet
• Bi-directional information exchange between KNX bus and PROFINET bus
• Mountable on 35mm Rail DIN

Specifications:

• Ports: 1x KNX; 1x Ethernet
• KNX protocol: KNX TP
• PROFINET protocol: PROFINET slave
• Data Rates KNX: 9600 bit/s
• Data Rates Ethernet: 10/100 Base-T Autosensing
• KNX connector: KNX Bus connector
• Ethernet connector: RJ45
• Power supply: 8...24VAC; 12...35VDC
• Power supply connector: 2way 5mm terminal block
• Operating temperature: -40°C to +85°C (-40°F to +185°F)
• Dimensions: 71 mm x 60 mm x 95 mm (DxWxH)
• Weight: 200g approx
• Mechanical fixing: 35mm DIN Rail mount
• Software: SW67818
• ORDER CODE: HD67818-KNX-B2

Configurator – Software SW67818 FREE DOWNLOAD

---