IMC100-2T1F(M)

2-port 10/100Base-T(X)+1-port 100Base-FX, Multi-mode.

IMC100 series are unmanaged industrial media converters. This series have 14 productsand support a variety of optional interfaces including 100M fiber ports, 100M copper ports,Gigabit fiber ports, Gigabit copper ports and Gigabit SFP. They adopt DIN-Rail mounting tomeet the requirements of different application scenes.

Product supports optional AC/DC power supply. The DIP switch could implement functionslike jumbo frame, LFP, one-key VLAN or flow control. Hardware adopts fanless, low powerconsumption, wide temperature and voltage design and has passed rigorous industrialstandard tests, which can suit for the industrial scene environment with harsh requirementsfor EMC. It can be widely used in smart city, rail transit, smart city, safety city, new energy,intelligent manufacturing and other industrial fields.

Features:

• Support 1 100M/Gigabit fiber port, 1/2 100M/Gigabit copper ports or 1 Gigabit SFP
• Support optional AC/DC, single/dual power supply, input voltage: 12~48VDC/ DC or 100~240VAC/DC
• Support -40~75℃ wide operating temperature range

Specification:

Standard & Protocol

• IEEE 802.3 for 10Base-T
• IEEE 802.3u for 100Base-TX and 100BaseFX
• IEEE 802.3z for 1000Base-X
• IEEE 802.3ab for 1000Base-T
• IEEE 802.3x for Flow Control
• IEEE 802.1Q for VLAN

Interface

• 100M copper port: 10/100Base-T(X), RJ45, Automatic Flow Control,Full/half Duplex Mode, MDI/ MDI-X Autotunning
• 100M fiber port: 100Base-FX, optional SC/ST/FC
• Gigabit copper port: 10/100/1000Base-T(X), RJ45, Automatic FlowControl, Full/Half Duplex Mode, MDI/MDI-XAutotunning
• Gigabit fiber port: 1000Base-FX, optional SC/ST/FC
• Gigabit SFP: 1000Base-FX SFP slot

Indicator

• Interface Indicator, Power Supply Indicator, LFP Indicator(1 copperport and 1 fiber port product only)

Switch Property:

IMC100-1T1F-P48, IMC100-1T1F-P220, IMC100-2T1F-P48,IMC100-2T1F-P220, IMC100-1T1F-2P48, IMC100-2T1F-2P48

• MAC address: 2K
• Backplane bandwidth: 1G
• Transmission mode: store and forward

IMC100-1GT1GF-P48, IMC100-1GT1GF-P220,IMC100-1GT1GS-P48, IMC100-1GT1GS-P220,IMC100-2GT1GF-P48, IMC100-2GT1GF-P220,IMC100-2GT1GS-P48, IMC100-2GT1GS-P220,

• MAC address: 2K
• Backplane bandwidth: 18.2G
• Transmission mode: store and forward

Power Supply

• Single power supply: DC/AC power supply (optional), 12~48VDC or100~240VAC/DC, 3-pin 7.62 pitch terminal blocks
• Dual power supply: 12~48VDC, 4-pin 5.08mm pitch terminal blocks

Power Consumption

• IMC100-1T1F-P48, IMC100-1T1F-2P48, IMC100-2T1F-2P48: No-load: 1.0W, Full-load: 1.1W
• IMC100-2T1F-P220: No-load: 1.2W, Full-load:1.5W
• IMC100-1GT1GS-P220: No-load: 1.5W, Full-load:2.0W
• IMC100-2GT1GF-P220: No-load: 1.5W, Full-load:2.5W

Working Environment

• Operating temperature: -40~75℃
• Storage temperature:-40~85℃
• Relative humidity: 5%～95% (no condensation)

Physical Characteristic

• Housing: IP40 protection, metal
• Installation: DIN-Rail mounting
• Dimension (W x H x D): 35mm×110mm×95mm
• Weight:
• IMC100-1T1F-P48, IMC100-1T1F-2P48, IMC100-2T1F-2P48:337g
• IMC100-2T1F-P220: 345g
• IMC100-1GT1GS-P220: 343g
• IMC100-2GT1GF-P220: 342g

Industrial Standard

IEC 61000-4-2 (ESD, electrostatic discharge), Level 4

• Air discharge:± 15kV
• Contact discharge: ±8kV

IEC 61000-4-4 (EFT, electrical fast transient), Level 4

• Power supply: ±4kV
• Signal: ±2kV

IEC61000-4-5 (Surge), Level 4

• Power supply: differential mode±2kV, common mode±4kV
• Signal: differential mode±2kV, common mode±4kV
• Shock: IEC 60068-2-27
• Free fall: IEC 60068-2-32
• Vibration: IEC 60068-2-6

Ordering Information

• IMC100-2T1F-P48: power suppply 12~48VDC
• IMC100-2T1F-2P48:power suppply 12~48VDC(redundant power supply)
• IMC100-2T1F-P220:power suppply 100~240VAC/DC

Certificates: CE, FCC, RoHSs

Manufacturer's warranty: 5 years

---