IMF2100-1F-1DI(3IN1)

DIN-rail mounting industrial converter 1-port RS-232/485/422 to 1-port Fiber Converter with 12~48VDC (single or dual power supply) or  85~265VAC.

IMF2100 series are 1/2 fiber ports + 1 RS-232/485/422 serial to fiber MODEM. They convert RS-232/485/422 serial port signal to optical signal and provide users with RS-232/485/422 serial port to implement transparent end-to-end transmission. This series provide 1 or 2 fiber ports with ring network function, 1 RS-232/485/422 serial port and multiple optional power solutions like 85~265VAC, 110~370VDC or 12-48VDC (single/dual power supply). They adopt DIN-Rail mounting, which can meet the requirements of different scenes.

Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in various situations like industrial control, process control, traffic control and intelligent residential district, and particularly applicable to bank, electricity, departments and systems that have special requirements relating to electromagnetic interference environment.

Feature:

• Support 1/2 fiber ports and 1 RS-232/485/422 serial port with isolation
• Support 1 relay alarm output for power failure and disconnection of fiber optics
• Support multiple optional power solutions including 85~265VAC, 110~370VDC or 12-48VDC (single/dual power supply)
• Support -40～75℃ wide operating temperature range

Specification:

Fiber Port:

• Interface quantity: 1/2 (support ring network)
• Fiber port: optional SC/FC/ST interface
• Transmission distance:
• Multimode: 2km
• Single mode: 20/40/60km
• Transmission wavelength:
• Multimode: 1310nm
• Single mode: 1310nm or 1550nm

Serial Port:

• Standard: EIA RS-232C, RS-485, RS-422
• Serial port: 1 RS-232/485/422 serial port, can’t be used simultaneously
• RS-232 signal: RXD, TXD, GND
• RS-485 signal: D+, D-, GND
• RS-422 signal: T+, T-, GND, R+, R-
• Baud rate: 300~115200bps
• Data bit: 5bit, 6bit, 7bit, 8bit
• Stop bit: 1bit, 1.5bit, 2bit
• Check bit: None, Even, Odd, Space, Mark
• Interface type: 7-pin 3.81mm pitch terminal block
• Direction control: RS-485 adopts automatic data flow control technology
• Load capacity: RS-485 supports 32-point polling environment (128-point could be customized)
• RS-485 pull up/down resistor: 4.7kΩ
• RS-485 terminal resistance: built-in 120Ω, could be controlled by DIP switch
• Transmission distance: RS-232 serial port, 15m；
• RS-485/422 serial port, 1200m

LED Indicator:

• Power Supply Indicator, Fiber Port Connection Indicator, Master/Slave Indicator, Alarm Indicator, Serial Port Data Receiving Indicator, Serial Port Data Sending Indicator

Power Requirement:

• Support four optional power solutions, 12~48VDC (single power supply), 12~48VDC (dual power supply), 110~370VDC or 85~265VAC
• 
  
• Solution 1
• Power supply range: 12~48VDC
• Connection method: 6-pin 5.08mm pitch terminal blocks (power supply occupies 4 pins)
• Power supply protection: built-in 2.0A over-current protection and non-polarity
• Power supply redundancy: support
• Solution 2
• Power supply range: 12~48VDC
• Connection method: 6-pin 5.08mm pitch terminal blocks (power supply occupies 2 pins)
• Power supply protection: built-in 2.0A over-current protection and non-polarity
• Solution 3
• Power supply range: 110~370VDC
• Connection method: 6-pin 5.08mm pitch terminal blocks (power supply occupies 2 pins)
• Power supply protection: built-in 2.0A over-current protection and non-polarity
• Solution 4
• Power supply range: 85~265VAC
• Connection method: 6-pin 5.08mm pitch terminal blocks (power supply occupies 2 pins)
• Power supply protection: built-in 2.0A over-current protection

Power Consumption:

• No-load: ≤3.0W@24VDC
• Full-load: ≤3.4W@24VDC

Environmental Limit:

• Operating temperature: -40°C~75℃
• Storage temperature: -40°C~85℃
• Relative humidity: 5%～95% (no condensation)

Physical Characteristic:

• Housing: IP40 protection, metal
• Installation: DIN-Rail mounting
• Weight: ≤360g
• Dimension (W x H x D): 35mm×110mm×95mm

Industrial Standard:

• IEC 60950-1 / EN 60950-1: Safety
• EN 55032: Conducted & Radiated Disturbances
• IEC 61000-3-2 Harmonic Current Emission
• IEC 61000-3-3 Voltage Fluctuation & Flicker
• EN 55024
• IEC 61000-4-2
• IEC 61000-4-3
• IEC 61000-4-4
• IEC 61000-4-5
• IEC 61000-4-6
• IEC 61000-4-8
• IEC 61000-4-11

Certification:

• CE, FCC, RoHS