IN485FGL001I000 – Fujitsu to BACnet MS/TP & Modbus RTU Gateway
3 year warranty
5-7 days
IN485FGL001I000 – Fujitsu to BACnet MS/TP & Modbus RTU Gateway
- Stock: 5-7 days
- Brand: Intesis
- Model: IN485FGL001I000
1 170,30 zł
2 pieces or more 1 111,79 zł
5 pieces or more 1 088,38 zł
10 pieces or more 1 053,27 zł
26 pieces or more 994,76 zł
51 pieces or more 889,43 zł
A proven choice for industrial installations.
Ask for compatibility and model selection.
Register and get cheaper offers today.
By the same series
3 year warranty
5-7 days
Brand: Intesis
Model: FJ-AC-MBS-1
Fujitsu RAC and VRF systems to Modbus RTU Interface (to CN connector). The Fujitsu-Modbus gateway INMBSFGL001I000 allows fully bi-directional communic..
1 264,30 zł
Full design package: User manual, CE declaration, CAD, PDF, certificates and test reports
If you're preparing technical documentation or an installation design, you can receive a complete set of design materials for this model. This is a quick way to gather the required documents for audits, acceptance, or project documentation.
- Device User Manual
- CE Declaration of Conformity (EU Declaration of Conformity)
- Mechanical Drawings – CAD (STEP/DWG) or high-quality PDF
- Additional Certificates (if available for the model)
- Test Reports (if available for the model)
IN485FGL001I000 – Fujitsu to BACnet MS/TP & Modbus RTU Gateway.
The IN485FGL001I000 gateway enables full bi-directional integration between Fujitsu air conditioning systems (RAC and VRF models) and BACnet MS/TP or Modbus RTU networks. Designed for easy installation and commissioning, this communication module connects directly to a single indoor unit and provides remote control and monitoring of essential AC functions, including temperature setpoint, fan speed, operating mode, and system status indicators such as errors or alarms.With its compact design, no need for additional power supply or external configuration software, and support for both major building automation protocols, it is a powerful solution for efficient and scalable HVAC system management in smart buildings. Simply set the DIP switches on the device and plug it into the AC unit – the system is ready to operate within minutes.
Features:
- Supports BACnet MS/TP and Modbus RTU simultaneously
- BTL certification ensures full BACnet interoperability
- Configuration via DIP-switches – no software required
- Plug-and-play installation without external power
- Compact enclosure: 93 x 53 x 58 mm (ideal for DIN rail or internal AC unit mounting)
- Total AC unit control via BACnet/Modbus including advanced features: eco mode, freeze protection, alarms
- Simultaneous use with Fujitsu IR remote control
- Energy efficiency through occupancy-based logic and advanced monitoring
- Reliable RS485 communication with configurable termination and polarization
- Three-year manufacturer warranty included
Specifications:
Enclosure:
- Plastic, PC type (UL 94 V-0)
- Dimensions (DxWxH): 93 x 53 x 58 mm / 3.7 x 2.1 x 2.3 inches
- Color: Light grey – RAL 7035
Low voltage terminal wiring:
- Single core: 0.5–2.5 mm² (24–11 AWG)
- Double core: 0.5–1.5 mm² (24–15 AWG)
- Triple core: Not allowed
Mounting:
- DIN rail, wall, or inside compatible AC indoor units
BACnet MS/TP & Modbus RTU port:
- 1 x EIA-485 terminal block (B, A, SG) with configurable DIP-switch termination (120 Ω)
AC Unit Port:
- 1 x EIA-485 terminal block (B, A, SG)
LED Indicators:
- 2 x Communication status LEDs
DIP-switch configuration:
- SW1: Gateway role, AC model, baud rate
- SW2: Protocol address and temperature units (Celsius/Fahrenheit)
- SW3: Bus polarization and termination
Operating & Storage Conditions:
- Temperature (Op): 0 to +70°C / 32 to 158ºF
- Temperature (St): -20 to 85ºC / -4 to 185ºF
- Humidity: 5%–95%, non-condensing
Electrical:
- Isolation Voltage: 1500 VDC
- Isolation Resistance: 1000 MΩ
Certifications & Compliance:
- BACnet BTL Certified
- EMC Directive 2014/30/EU & Low Voltage Directive 2014/35/EU
- Standards: EN 61000-6-2, EN 61000-6-3, EN 62368-1
- RoHS 2 compliant (Directive 2011/65/EU)
Warranty:
- 36 months
