LBK-C22

Controller LBK-C22, can connect up to six LBK-S01 smart sensors.

The Inxpect LBK-C22 is the system control unit. It can connect up to six LBK-S01 smart sensors. Intervention of any single sensor results in the deactivation of the controller’s safety output.

The LBK-C22 control unit can be configured with the Inxpect Safety PC application through USB cable connection, which allows the configuration of sensitivity levels, safety functions, size of warning and dangerous areas, and the functionality of the controller’s I/O ports.

The digital inputs can be configured through the Inxpect Safety application software. The controller has two auxiliary relay outputs, which can be configured to signal: pre-alarm, fault, muting status. The controller has one dual-channel, force-guided safety relay output for alarms and direct or indirect safety of the machinery.

Specification:

• Detection method: Inxpect motion detection algorithm based on FMCW radar
• Frequency: 
• Working band: 24–24,25 GHz (24.05-24.25 for UK and FR)
• Transmission power: ≤ 13 dBm - Modulation: FMCW
  
• Detection interval: 0-4 m
• Guaranteed response time: <100 ms
• Sensing field andInstallation height:
• Wide FOV configuration: 110° Horiz. | 30° Vert., Height: 0 to 3 m (0 to 9.8 ft)
• Narrow FOV configuration: 50°Horiz. | 15° Vert., Height: 0 to 3 m (0 to 9.8 ft)

• SIL: 2
• PL: d
• MTTFd: 40 years
  
• Category: 2 (3 for the outputs)
• Total consumption: 11 W (controller and six sensors)
• Operating Temperature: -40 °C do +60°C 
• Storage Temperature: -40 °C do +80°C
• Communication protocol (sensors-controller): CAN complies with standard EN 50325-5
• Outputs: 4 relay outputs: 1 dual channel safety output | 2 auxiliary outputs
• Safety relay outputs: Max voltage: 30 V dc | Max current: 8 A dc | Max power: 240W
• Auxiliary relay outputs: Max voltage: 30 V dc | Max current: 2 A dc | Max power: 60W
• Inputs: 3 dual channel digital inputs with common GND: 1 type 1 | 1 type 2 | 1 type 3
• Power supply: 24 V dc (20–28 V dc) Max current: 0.6A
• Consumption:3.8W
• Assembly: DIN guide
• Degree of protection: IP20
• Terminals: section: 2.5mm2 | Max Current: 12A with 2.5mm2 cables
  
• Warranty period: 3 years