2-3 days
Industrial expansion module, 8 universal analog inputs to Modbus RTU, with RS485 interface.
Features:
- INPUT: 8 analog inputs, universal
- OUTPUT: Interface RS485: Modbus (ASCII, RTU)
- Power supply: 10 ~ 38VDC; 10 ~ 28VAC
- Operation of voltage inputs + 10V, + -10V
- Supports current inputs +-20mA, 0-20mA, 4-20mA
- Each channel can be freely set to measure voltage or current with different measuring ranges
- Two configurable NPN outputs up to 500mA, switched remotely or automatically when the specified value is exceeded from the selected input
- LEDs for signaling status of inputs and outputs
- Large, convenient cable connectors (up to 2.5 mm2)
- 1000V galvanic isolation between RS485 interface, power supply and measuring inputs
- 2 years warranty
- Made in Poland
The 8AI module allows you to measure voltages and currents. The value is read using the RS485 bus (Modbus protocol), so you can easily integrate the module with popular PLCs, HMIs, or PCs with appropriate adapters.
The module communicates with all commercially available PLCs, devices that support the popular MODBUS MASTER protocol.
The unit has a set of 8 analogue inputs. In addition, the module is equipped with 2 configurable digital outputs.
This module is connected to the RS485 bus via two wire twisted pair. Communication is made using the MODBUS RTU or MODBUS ASCII protocol. The use of a 32-bit ARM core processor provides fast data processing and fast communication. The transmission speed is configurable from 2400 to 115200.
The module is designed for mounting on DIN rail according to DIN EN 5002.
The module is equipped with a set of LEDs used to indicate the status of connected sensors and outputs, useful for diagnostic purposes and for troubleshooting.
Configuration of the module is done via USB with a dedicated computer program. It is also possible to change parameters using the MODBUS protocol.
SLIM modules can be easily connected to each other via the Quick Connector. Just supply the module and RS485 power to the first module. With the MOD-QC tape, both values will be passed to the next modules.
Available accessories:
- Switching tape: MOD-QC
- Programming cable: mini USB
| General technical parameters | |
| Serial port | 1x RS-485 |
| I/O | 8x analog input |
| Protocol support | Modbus RTU, Modbus ASCII |
| Industrial grade | |
| Optoisolation | 1000V |
| Operating temperature | -20°C to 65°C |
| Input voltage | 12~24VDC |
| Manufacturer's warranty | 2 years |
| Mount | DIN rail |
