OnGc-G 0.6/1 kV 4-core

Miner tire unground wires with insulation and rubber tire for rated voltage 0.6 / 1 kV.

Construction:

• Veins:
• Multi-wire copper according to PN-88 / E-90160
• Class 5 workplace
• Protective class 5c (tin plated)
• Separator: On working conductors made of polyester film or paper
• Insulation: On working conductors made of heat-resistant rubber type IEP with properties according to PN-89 / E-29100
• The color of the insulation of the veins: Working - natural, red, green
• A protective vein separated in three parts: Each part was in conductive rubber type GP with properties according to PN-89 / E-29100 black, corrugated surface
• Wire center: Filled with inserts and wrapped with conductive tape
• Tire: Made of ON4 type tire rubber with properties according to PN-89 / E-29100
• Tire color: Black or other - after agreement with the customer

Characteristic:

• Application: For connecting mobile and portable devices in mining plants
• Explanation of the letter symbol of the wire: OnGc-G - power cable with copper conductors with heat-resistant rubber insulation (Gc) and rubber tire resistant to flame spread (On) - mining (G) with strands twisted into the center on the core
• Example of wire marking: OnGc-G - OnGc-G wire, 4-wire, 0.6 / 1 kV, 70 mm2 core wire, 25 mm2 protective conductor: OnGc-G 3x70 + 3x25 / 3 mm2 0.6 / 1 kV cable, ZN- 95 / MP-13-K101
• Maximum core temperature during cable operation: + 90 °C
• The smallest possible bending radius:
• For permanent installation of 6D
• For 10D mobile receivers
• D - diameter of the wire
• Assay voltage: 3.2 kV
• Packing: On drums

Compliant with: ZN-95 / MP-13-K 101

Certificates: EMAG

---