OnGcekż-G2 0.6/1 kV

Power cables for mobile and portable receivers. Mining wires shielded for rated voltage 0.6 / 1 kV.

Construction:

• Working cores: Copper multi-wire class 5 acc. PN-EN 60228
• Auxiliary cores: Copper tinned multi-wire class 5 acc. PN-EN 60228
• Protective conductor: Made in the form of a braid made of tinned copper wires with a diameter of 0.30 mm and a plastic yarn placed on the shell of auxiliary veins, in a roll made of polyester film. The cross-section of the protective conductor includes the cross-section of screens of working wires
• Separator: On operating wires made of polyester film
• Insulation: IEP heat-resistant rubber according to PN-89 / E-29100
• Conveyor of insulated working conductors: Made of unilaterally rumpled fibrous tape or conductive tape
• Screen: Of tinned copper wires of 0.30 mm diameter and plastic yarn made in the form of a braid with a coverage density of at least 75% - for a case of a banded tape or a covering density of at least 30% in the case when there is a zip conductive tape
• Auxiliary core sheathing: From IZ, IB or IEP rubber according to PN-89 / E-29100
• Core: IZ or IEP rubber according to PN-89 / E-29100 (to the center of six auxiliary veins)
• Tire: Made of ON-4 type rubber according to PN-89 / E-29100
• Tire color: Black

Characteristic:

• Application: For powering mining mines
• Explanation of the cable symbol: OnGcekż-G2 - power cable (O), with copper conductors with heat-resistant rubber insulation (Gc) and flame retardant rubber (n), with shielded wires with copper wire and fiber (ekż), mining, with two vein systems (-G2)
• Example of wire marking:
• OnGcekż-G2 ten-core cable for 0.6 / 1 kV voltage with conductor cross section I 50 mm2, 16 mm2 conductor core with rated cross section of 25 mm2 protective conductor and nominal cross-section of auxiliary conductors 4 mm2: OnGcekż-G2 3x50 + 3 + 16 + 25 cable + 3x4 mm2 0.6 / 1 kV according to WT-96 / K-346
• OnGcekz-G2 fourteen-wire cable for 0.6 / 1 kV voltage with conductor cross section I and II of 95 mm2, rated cross section of a protective conductor 25 mm2 and nominal cross-section of auxiliary conductors 4 mm2: OnGcekż-G2 wire 6x95 + 25 + 7x4 mm2 0.6 / 1 kV WT-96 / K-346
• Maximum cable temperature: + 90 °C
• Assay voltage:
• Working veins: 3.2 kV
• Auxiliary veins: 2 kV
• Packing: On drums

Compliant with: WT-96 / K-346

---