EISK8-100TF

Industrial Unmanaged Switch with 6 Ethernet ports and 2 Fiber ports.

EISK8 Skorpion fibre switches are eight-port unmanaged Ethernet switches that provides 100 Mbps performance on all ports to accommodate a range of control devices and workstations commonly found in an automation project. For 10 Mbps legacy devices, the switches automatically reduce port-speed. These low-cost compact units have a rugged metal enclosure and are intended for installation in control panels using DIN-rail mounting. These are a plug-and-play Ethernet switches that require no configuration. All copper ports automatically configure their data rate and duplex using the Auto-negotiation protocol. Depending on the capability of the link partner, communication is set at 10 or 100 Mbps and at either half- or full-duplex. Each port accommodates either a straight-through or crossover cable using the Auto-MDIX protocol.

Each unit is powered from a low-voltage source (either AC or DC). Redundant power connections are provided for back-up power schemes. LEDs assist in troubleshooting.

Features:

• Plug-and-Play operation
• 6 10/100BaseT(X) Ethernet ports and 2 10/100Base-FX Fiber ports
• Single-mode or multimode fibre
• Shielded RJ-45 connectors
• Auto-negotiation of speed and duplex
• Auto-MDIX supports cable inversion
• DIN-rail mounting
• Rugged metal enclosure
• 24 VAC/VDC powered

Specification:

Ethernet Communications

• IEEE 802.3 10/100 Mbps data rate using RJ-45 connectors, 100 m (max)
• IEEE 802.3 100BASE-FX using either ST or SC connectors:
• Multimode: 2 km maximum cable length
• Single-mode: 15 km maximum cable length

LEDs

• Power: Green = power OK
• "L" LEDs:
• Green = 100 Mbps communication established
• Yellow = 10 Mbps communication established
• Flashing = data transmissions occurring
• "D" LEDs:
• Green = Full-duplex communication established
• Off = Half-duplex communication established

Power

• 10–36 VDC 6 W or 24 VAC ±10% 12 VA 47–63 Hz

Envrionmental

• Operating temperature: 0°C to 60°C
• Storage temperature: -40°C to 85°C
• Relative Humidity: 10–95%, non-condensing

Mechanical

• Dimensions: 146 mm x 41 mm x 96 mm
• Shipping weight: 0.45 kg
• IP protection: IP30
• Mounting: TS-35 DIN Rail

Certificates:

• CE Mark; CFR 47, Part 15 Class A; RoHS
• UL 508 Industrial Control Equipment

Manufacturer's warranty: 5 years

>

---