Menu
Your Cart

GREENPAS CCSXWK 20 kV

GREENPAS CCSXWK 20 kV
To be confirmed
GREENPAS CCSXWK 20 kV
0.00 zł
A proven choice for industrial installations.
Ask for compatibility and model selection.
Register and get cheaper offers today.

Full design package: User manual, CE declaration, CAD, PDF, certificates and test reports

If you're preparing technical documentation or an installation design, you can receive a complete set of design materials for this model. This is a quick way to gather the required documents for audits, acceptance, or project documentation.

  • Device User Manual
  • CE Declaration of Conformity (EU Declaration of Conformity)
  • Mechanical DrawingsCAD (STEP/DWG) or high-quality PDF
  • Additional Certificates (if available for the model)
  • Test Reports (if available for the model)
Request a package: User manual, CE declaration, CAD, PDF, certificates, test reports

Wires in insulation casing for overhead lines.

Construction:

  • Conductor: Condensed core of AlMgSi alloy, aluminum grade AL3 according to EN 50183; sealed with a special powder to prevent longitudinal moisture migration
  • Semi-conductive layer: A special compound responsible for the even distribution of the electric field
  • Insulation: Two-layer XLPE polyethylene insulation according to EN 50397-1: 2006
  • Insulation color: Transparent / green

Properties:

  • Alternating voltage Uo/U: 12/20 kV
  • Maximum temperature of the vein during cable operation: +90°C
  • Maximum core temperature during short circuit: +250°C
  • Ambient temperature during operation of a permanently installed cable: from -40°C to +70°C
  • The minimum ambient temperature during the installation of the cable: from -20°C
  • Minimum bending radius: 15 D
  • Application: For power lines with rated voltage not exceeding 20kV
  • Packaging: Wooden drums at 500 or 1000 meters; Other lengths of sections according to orders and arrangements with the client

Complies with: PN-EN 50397-1, EN 50183


Industrial grade
Operating temperatureto 90°C
Cable parameters
Minimum bending radius15D
CoreAlMgSi
InsulationPolyethylene, XLPE
Installation temperature-20°C to 90°C
Maximum short circuit temperature250°C
Maximum allowable tensile stresses14.2 kN, 20.6 kN, 27.9 kN, 35.2 kN
Standard packagingOn drums
Minimum ambient temperature-40°C
Outer diameter [mm]13.9, 15.3, 16.7, 18.2
Cable weight [kg/km]229, 297, 376, 456

Write a review

Note: HTML is not translated!
Bad Good
1