Menu
Your Cart

TLC485

TLC485
TLC485
TLC485
In stock
TLC485
TLC485
TLC485
TLC485
  • Stock: In Stock
  • Brand: 3onedata
  • Model: TLC485
Product Views: 18423
15,84 €

Industrial bidirectional RS-232 to RS-485 converter, without opto-isolation, powered from port.

The TLC485 is a bi-directional port-powered RS-232 to RS-485 converter. It can convert any standard full duplex RS232C port to any two-wire balanced half duplex RS485 port. In simple terms, it will convert any RS232 signal to a RS485 signal and vice versa. The unit is powered from the RS232 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the RS485 driver when data is present on the RS232 side making the device plug-and-play, requiring no software drivers. Alternative offer for TCC-80I.

Features:

  • Port-powered from RS-232 port (TXD,RTS,DTR): no external power is necessary
  • Convert RS-232(TXD,RXD signal) to RS-485 signal
  • Plug-and-Play (hot-pluggable, Data format Auto-sensing & Self-adjusting)
  • Data direction auto-turnaround, no flow control is required
  • Point to multi point, support 128 nodes loopback

Specification:

Serial port

  • Standards: EIA RS-232C, RS-485 standard
  • RS-232 signal: TX, RX, GND
  • RS-485 signal: D+, D-, GND
  • Working mode: Asynchronism, point to point, 2 wire half-duplex
  • Transfer rate: 300~115200bps, auto test serial signal rate detect signal speed automatically, zero delay time
  • Flow control: Data direction auto-turnaround, no flow control is required
  • Max number of drops: 128 nodes
  • Transfer distance:
    • RS-485 side: 1.2Km
    • RS-232 side: no less than 5m
  • Port protect: 1500W surge protection,15KV ESD protection
  • Connector:
    • RS-232 side DB9 female
    • RS-485 side DB9M( DB9F to 3 bit terminal block)

Power:

  • Power input: No power supply need, powered from RS-232 port TXD, RTS, DTR
  • Consumption: Static less than 10mA, dynamic less than 40mA

Environmental:

  • Operating temperature: -20°C to 60°C
  • Storage temperature: -25°C to 85°C
  • Humidity: 5% to 95% (no condensation)

Appearance:

  • Dimensions: 90.0 mm x 33.0 mm x 16.5 mm (DB9)
  • Material: Plastic (shell)
  • Weight: 40g

Manufacturer's warranty: 3 years

Certificates: FCC, CE, RoHS approvals

Dimensions:


General technical parameters
Serial port 1x RS-232, 1x RS-485
Industrial grade
Surge protection 1500W, 15KV ESD
Casing Plastic
Operating temperature -20°C to 60°C
Input voltage Port powered
Certificates & standards FCC, CE, RoHS
Manufacturer's warranty 3 years

Write a review

Note: HTML is not translated!
Bad Good
We use cookies to offer you the best experience on our site. By continuing to browse the site, You are agree to use cookies.