Menu
Your Cart

MOD-1AI

MOD-1AI
MOD-1AI
2-3 days
MOD-1AI
MOD-1AI
MOD-1AI
  • Stock: 2-3 days
  • Brand: Aspar
  • Model: MOD-1AI
388,80 zł

Industrial expansion module with 1 input for current measurement and 1 input for voltage measurement on Modbus RTU, with RS485 interface.

Features:

  • INPUT: 1 input for current measurement, 1 input for voltage measurement
  • OUTPUT: Interface: RS485 - Modbus (ASCII, RTU)
  • Operation of voltage input 0~10VDC; -10~+10VDC, 0~1VDC; -1~+1VDC
  • Operation of current inputs 0~20mA, 4-20mA, -20~+20mA
  • One configurable PNP or NPN output (2 ways to connect) up to 250mA, switched remotely or automatically when the set value is exceeded from the selected input
  • LEDs for signaling of sensor connection and output status
  • Large, convenient cable connectors (up to 2.5 mm2)
  • 1000V galvanic isolation between RS485 interface, power supply and measuring inputs
  • 2 years warranty
  • POLISH PRODUCT

The 1AI module allows you to measure voltages and currents. The value is read using the RS485 bus (Modbus protocol), so you can easily integrate the module with popular PLCs, HMIs, or PCs with appropriate adapters.

The module communicates with all commercially available PLCs, devices that support the popular MODBUS MASTER protocol.

The device has 1 input for voltage measurement and 1 input for current measurement (both inputs can be used simultaneously). In addition, the module is equipped with one configurable digital output.

This module is connected to the RS485 bus via two wire twisted pair. Communication is made using the MODBUS RTU or MODBUS ASCII protocol. The use of a 32-bit ARM core processor provides fast data processing and fast communication. The transmission speed is configurable from 2400 to 115200.

The module is designed for mounting on DIN rail according to DIN EN 5002.

The module is equipped with a set of LEDs used to indicate the status of connected sensors and outputs, useful for diagnostic purposes and for troubleshooting.

Configuration of the module is done via USB with a dedicated computer program. It is also possible to change parameters using the MODBUS protocol.


General technical parameters
Serial port 1x RS-485
I/O 1x current input, 1x voltage input
Protocol support Modbus RTU, Modbus ASCII
Industrial grade
Optoisolation 1000V
Operating temperature -10 °C to +50°C
Input voltage 10~38VDC, 20-28VAC
Manufacturer's warranty 2 years
Mount DIN rail

Write a review

Note: HTML is not translated!
Bad Good

We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!

Tags: analog , aspar , MOD-1AI , Analog
We use cookies to offer you the best experience on our site. By continuing to browse the site, You are agree to use cookies.