3-4 days
Industrial PROFIBUS slave to Modbus TCP slave converter, PROFIBUS DP DPV0 support, housing type A (slim), DIN rail mount.
HD67565-A1 allows to connect PROFIBUS master like Siemens PLC to Modbus TCP master (for example PLC or SCADA system). Converter is easy to use and configure thanks to free SW67565 software.
Configuration:
Thanks to the SW67565 software on your PC you can:
- Define the parameters of Modbus TCP line
- Define the parameters of PROFIBUS
- Define which Modbus TCP registers are saved in the PROFIBUS arrays
- Create a GSD File
- Update the device
Characteristics:
- Electrical isolation between two buses
- Bi-directional information exchange between Modbus TCP network and PROFIBUS
- Up to 244 bytes in reading and 244 bytes in writing
- Mountable on 35 mm DIN rail
Specifications:
- Ports: 2x Ethernet; 1x PROFIBUS
- Data Rates PROFIBUS: Up to 12 Mbps
- Data Rates Ethernet: 10/100 Mbps Autosensing
- PROFIBUS connector: D-Sub9 Female
- Ethernet connector: RJ45
- Power supply: 8...24VAC; 12...35VDC
- Operating temperature: -40°C/+85°C (-40°F/+185°F)
- Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: DIN Rail mount
- PROFIBUS DP DPV0 support
- Software: SW67565
- ORDER CODE: HD67565-A1
