3-4 days
Industrial DALI to DeviceNet Slave converter, housing type B (wide), DIN rail mount.
HD67837-B2 is a DALI / DeviceNet Slave Converter so you can connect a DALI net (a light system etc...) with a DeviceNet Master (like Allen-Bradley PLC...) in order to exchange informations between the nets. Converter is easy to configure thanks to free SW67837 software.
Configuration:
Thanks to the "DALI Console" software on your PC you can:
- Configure the DALI network
- Setup the DALI devices (groups, scenes, IDs, etc.)
- Test DALI communication
Thanks to the SW67837 software on your PC you can:
- Define the parameters of DALI line
- Define the parameters of DeviceNet line
- Update the device
Characteristics:
- Up to 56 devices on DALI bus
- Configurator for DALI network/devices
- Isolation between DALI – DeviceNet, Power Supply – DeviceNet; Additional isolation Power Supply – DALI for HD67837-B2-N version
- Bi-directional information exchange between DeviceNet bus and DALI bus
- Mountable on 35mm Rail DIN
Specifications:
- Ports: 1x DALI; 1x CAN
- DALI protocol: DALI
- CAN protocol: DeviceNet Slave
- Data Rates DALI: 1200 bps
- Data Rates DeviceNet: Up to 1 Mbps
- DALI Connector: 2way 5mm terminal block
- DeviceNet Connector: 3way 5mm terminal block
- Power supply: 8...24VAC; 12...35VDC
- Power supply Connector: 2way 5mm terminal block
- Operating temperature: -40°C to +85°C (-40°F/+185°F)
- Dimensions: 36 mm x 60 mm x 95 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: DIN Rail mount
- Software: SW67837
- ORDER CODE: HD67837-B2
