Menu
Your Cart

SW485WA

SW485WA
SW485WA
SW485WA
SW485WA
Shipping 24h Test for Free!
SW485WA
SW485WA
SW485WA
SW485WA
SW485WA
  • Stock: In Stock - delivery 1-2 working days!
  • Brand: 3onedata
  • Model: SW485WA
202.87 zł

The SW485WA is an industrial grade bi-directional port-powered 2500V optoisolated RS232 to RS485 converter in a 9 pin format.

The SW485WA is an industrial grade bi-directional port-powered 2500V opto-isolated RS232 to RS485 converter in a 9 pin format. It can convert any standard full duplex RS232C port to any two-wire balanced half duplex RS485 port. In simple terms, it will convert any RS232 signal to a RS485 signal and vice versa. The unit is powered from the RS232 data lines, therefore, no external power or flow control is required. It also supports data direction auto-turnaround. The data direction auto-turnaround automatically enables the RS485 driver when data is present on the RS232 side making the device plug-and-play, requiring no software drivers. The SW485WA has a DB9 female connector on the RS232 side and either a DB9 male connector or 3 bit terminal block on the RS485 side.

Features:

  • Optical isolation effectively protects RS-232/RS-485 devices from transient surges, ground loop, and remote lightning
  • Plug-and-Play (Device is hot-pluggable, Data format Auto-sensing & Self-adjusting)
  • Maximum baud rate 38400bps, 1200m (9600bps)
  • Port-powered, no external power or TXD, RTS, DTR required
  • Data direction auto-turnaround, no flow control is required
  • 2500V isolation, no power supply needed

Specification:

Serial port:

  • Standards: EIA RS-232C, RS-485 standard
  • RS-232 signal: TX, RX, GND
  • RS-485 signal: D+, D-, GND
  • Working mode: Asynchronism, point to point or multi point, 2 wire half-duplex
  • Baud rate: 300~115200bps, auto test serial signal rate detect signal speed automatically, zero delay time
  • Flow control: Data direction auto-turnaround, no flow control is required
  • Transfer distance:
    • RS-485 side: 1.2Km, 9600bps
    • RS-232 side: no less than 5m
  • Max number of drops: 128 nodes
  • Optical isolation: 2500V
  • Port protect: 1500W surge protection, 15KV ESD protection
  • Connector:
    • RS-232 side DB9 female
    • RS-485 side DB9M (DB9F to 3 bit terminal block)

Power:

  • Power input: No power supply need, powered from TXD, RTS, DTR
  • Consumption: Static less than 10mA, dynamic less than 40mA

Environment:

  • Operating temperature: -40°C to 80°C
  • Storage temperature: -40°C to 85°C
  • Humidity: 5% to 95% (no condensation)

Appearance:

  • Dimensions: 95.0 mm x 33.0 mm x 16.5 mm
  • Material: Plastic (shell)
  • Weight: 50g

Warranty: 3 years

Approvals: FCC, CE, RoHS approvals

Dimensions:


General technical parameters
Serial port 1x RS-232, 1x RS-485
Industrial grade
Surge protection 1500W, 15KV ESD
Optoisolation 2500V
Casing Plastic
Operating temperature -40°C to 80°C
Input voltage Port powered
Certificates & standards FCC, CE, RoHS
Manufacturer's warranty 3 years

Write a review

Note: HTML is not translated!
Bad Good
1

We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!

We use cookies to offer you the best experience on our site. By continuing to browse the site, You are agree to use cookies.