HD67811-KNX-B2-80

Industrial MBus to KNX TP converter, master MBus up to 80 slaves, housing type B (wide), DIN rail mount.

The converter for communication with meters uses the MBus, KNX connector is used for KNX communication. The HD67811-KNX-B2-80 converter can read up to 80 MBus receivers of any type (eg water meters, gas meters, energy meters).

New converter functionality - automatic scan of MBus receivers

There is no longer need to consult the manufacturer or analyze the protocol frame from the MBus counter - everything will be handled for you our dedicated software SCAN&DECODE!

To facilitate the installation of already easy-to-use ADFweb MBus converters, the manufacturer has developed dedicated software that automatically scans the MBus and decodes all the registers contained in the telegram. In practice, this means fast installation of converters and trouble-free system setup.

SCAN&DECODE - quick manual

We have also provided you with a very brief description of the functionality, which is available for download at the CONSTEEL Electronics store documentation.

Configuration:

Thanks to the SW67811 software on your PC you can:

• Define the parameters of MBus line
• Define the parameters of KNX line
• Define which MBus variables are readable on KNX
• Update the device

Characteristics:

• Electrical isolation between KNX and MBus
• Baud Rate and Parity (for MBus on wire) changeable with software
• Mountable on 35mm Rail DIN

Specification:

• Ports: 1x KNX; 1x MBus
• KNX protocol: KNX TP
• MBus protocol: MBus master
• Data Rates KNX: 9600 bit/s
• Data Rates MBus: Up to 38400 bps
• KNX connector: KNX Bus connector
• MBus connector: 2way 5mm terminal block
• Power supply: 15...21VAC; 18...35VDC
• Power supply connector: 2way 5mm terminal block
• Operating temperature: -40°C to +85°C (-40°F to +185°F)
• Dimensions: 71 mm x 60 mm x 95 mm (DxWxH)
• Weight: 200g approx
• Maximum power consumption at converter start-up: 30W
• Mechanical fixing: 35mm DIN Rail mount
• Software: SW67811
• ORDER CODE: HD67811-KNX-B2-40

Configurator – Software SW67811 FREE DOWNLOAD

Each MBus converter available in our offer is easy to mount on DIN rail, immunity to electromagnetic interference and the possibility of installation in outdoor boxes and environments with a wide operating temperature range from -40°C to 85°C. Our MBus converters are versatile devices designed to work in a variety of industrial environments.

MBus (Meter-Bus) is the European standard for reading a wide range of consumer meters. Because the MBus consists of a protocol layer and an electrical interface, in most cases, an additional external converter is needed to read the meter with an MBus. Converters with MBus interface are used to read meter data such as gas meters, electricity meters, water consumption meters, etc.

---