Menu
Your Cart

ET-2242 CR

ET-2242 CR
ET-2242 CR
ET-2242 CR
ET-2242 CR
2-3 weeks
ET-2242 CR
ET-2242 CR
ET-2242 CR
ET-2242 CR
ET-2242 CR
  • Stock: 2-3 weeks
  • Brand: ICPDAS
  • Model: ET-2242 CR
1 007,59 zł

Ethernet I/O Module with 2 Ethernet Ports and 16 Open Collector Digital Outputs.

Providing various digital I/O functions, the ET-2242 module is an IP-based Ethernet I/O monitoring and control module. The module can be remotely controlled through a 10/100 M Ethernet network by using Modbus TCP/UDP protocol. Modbus has become a de facto standard communications protocol in industry, and is now the most commonly available means of connecting industrial electronic devices. This makes the ET-2242 module perfect integration with the HMI, SCADA, PLC and other software systems. The ET-2242 provides 16 Digital Output channels, each of which features photo couple isolation. The ET-2242 supports sink type output with short circuit protection and each channel can drive 650 mA load. There are configurable power-on and safe values for Digital Output. With 2 Ethernet ports, the ET-2242 allows daisy chain connection which permits the flexibility in locating devices, eases installation and lowers infrastructure costs. It features 8 kV ESD protection, 4 kV EFT protection, 3 kV surge and 3000 VDC I/O isolation are also provided to enhance noise protection capabilities in industrial environments.

The module can be used to create DI to DO pair-connect through the Ethernet. After configuration, the ET-2242 module can poll the status of the local DI channels and then use the Modbus/TCP protocol to continuously write to the remote DO devices. It is equipped with removable terminal block connector for easy and robust wiring in industrial situations, and features a powerful 32-bit ARM MCU to handle efficient network trafficking.

Features:

  • Built-in Web Server
  • Support Modbus TCP/UDP Protocols
  • Powerful 32-bit MCU Handles Efficient Network Traffic
  • 2-port Ethernet Switch (LAN Bypass) for Daisy-Chain Wiring
  • Dual Watchdog
  • I/O Pair Connection (Push and Polling)
  • Supports web configuration and firmware update via Ethernet
  • 16 open collector digital output channels
  • Wide Operating Temperature Range: -25°C ~ +75°C

Manufacturer's warranty: 12 months

Certificates: CE, FCC


General technical parameters
Ethernet 2x 10/100BaseT(X)
I/O 16x digital outputs
Protocol support Modbus TCP
Industrial grade
Optoisolation 1500 VDC, 3000 VDC
Operating temperature -25°C to 75°C
Input voltage 10~30VDC
Mount DIN rail

Write a review

Note: HTML is not translated!
Bad Good
1

We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!

We use cookies to offer you the best experience on our site. By continuing to browse the site, You are agree to use cookies.