Menu
Your Cart

CAN104-DN

CAN104-DN
5-10 days
CAN104-DN
4 184,04 zł

Interfaces PC/104 Computers to the CAN Network.

The Philips SJA1000 CAN stand-alone controller chip provides new degrees of functionality for the CAN104 at a low cost. By not incorporating a co-processor, the CAN104 is a cost-effective and high-performance solution for automotive and industrial applications.

The SJA1000 keeps pace with the industry with its many capabilities-more than its predecessor, the older 82C200. It is backward compatible with the 82C200. The 82C200 is restricted to BasicCAN (11-bit identifiers) while the SJA1000 operates in either BasicCAN or PeliCAN which supports the CAN 2.0B specification (29-bit identifiers). The SJA maintains extended frame passivity while in the BasicCAN mode.

This controller chip is designed with a 16 MHz clock, a larger receive buffer and a better acceptance-filtering-including the ability to extend the acceptance mask to the data field. It has the ability to operate at data rates up to 1 Mbps.

The PeliCAN mode has these features: error counters with read/write access; programmable error warning limit; last error code register; error interrupt for each CAN-bus error; arbitration lost interrupt with detailed bit position; single-shot transmission (no retransmission); listen-only mode (no acknowledge, no active error flags); acceptance-filter extension (4-byte mask); and reception of "own" messages (self-reception request).

The CAN104 adapter incorporates the DeviceNet physical layer with optically-isolated transceiver, reverse-voltage and short-circuit protection. Field connectors include the DeviceNet 5-position open-style and DE-9 as defined by CAN in Automation (CiA).

Features:

  • Interfaces CAN to PC/104 compatible computers
  • Highly-featured Philips SJA1000 controller
  • Compatible PCA82C200 mode (defaults to BasicCAN mode)
  • Extended receive buffer (64-byte FIFO)
  • CAN 2.0B protocol compatibility
  • Supports both 11-bit and 29-bit identifiers
  • 16 MHz clock frequency
  • Drivers available for Windows® 98/ME/2000/XP, Linux and DOS
  • Choice of either open-style screw terminals or DB-9 connector
  • Data rates up to 1 Mbps

Specification:

Envrionmental

  • Operating temperature: 0°C to 60°C
  • Storage temperature: -40°C to 85°C

Power

  • +5V, 150 mA

Functionality

  • Data rate: up to 1 Mbps
  • Connectors: Male DB9 and 5-position screw terminals are provided for CAN connection
  • I/O mapping - BasicCAN: In BasicCAN mode, the CAN104 can occupy any of the following 32-byte blocks of I/O space:
    • 000 020 040 060 080 0A0 0C0 0E0 100 120 140 160 180 1A0 1C0 1E0
    • 200 220 240 260 280 2A0 2C0 2E0 300 320 340 360 380 3A0 3C0 3E0
  • I/O mapping - PeliCAN: In PeliCAN mode, the CAN104 can occupy any of the following 128-byte blocks of space:
    • 000 080 100 180 200 280 300 380
  • Interrupt lines: Support selection of IRQ2 through IRQ15
  • Compliance: CAN2.0A and CAN2.0B

Mechanical

  • Dimensions: 90 mm x 95 mm
  • Shipping weight: 0.45 kg

Manufacturer's warranty: 24 months


Industrial grade
Operating temperature 0°C to 60°C
Manufacturer's warranty 24 months

Write a review

Note: HTML is not translated!
Bad Good
1

We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!

We use cookies to offer you the best experience on our site. By continuing to browse the site, You are agree to use cookies.