MDR-100-24

96W Single Output Industrial DIN Rail Power Supply.

DIN rail mounted power supply unit with 24VDC output voltage, 96W power, 4A output current and fanless cooling.

Features:

• Universal AC input/Full range
• Protections: Short circuit / Overload / Over voltage / Over temperature
• ZCS/ZVS technology to reduce power dissipation
• Cooling by free air convection
• Can be installed on DIN rail TS-35/7.5 or 15
• DC OK relay contact
• 100% full load burn-in test
• No load power consumption < 1W

Specification:

Power supply

• Output:
• DC Voltage: 24V
• Rated Current: 4A
• Current Range: 0 ~ 4A
• Rated Power: 96W
• Ripple & Noise (max.): 150mVp-p
• Voltage Adj. Range: 24 ~ 30V
• Voltage tolerance: +/- 1.0%
• Line Regulation: +/- 1.0%
• Load Regulation: +/- 1.0%
• Setup, Rise Time: 3000ms, 50ms/230VAC; 3000ms, 50ms/115VAC at full load
• Hold up time (typical): 50ms/230VAC; 20ms/115VAC at full load
• Input:
• Voltage Range: 85 ~ 264VAC; 120 ~ 370VDC
• Frequency range: 47 ~ 63Hz
• Power Factor (typical): PF≧0.95/230VAC; PF≧0.98/115VAC at full load
• Efficiency (typical): 86%
• AC Current (typical): 1.3A/115VAC; 0.8A/230VAC
• In Rush Current (typical): Cold Start 30A/115VAC; 60A/230VAC
• Leakage Current: <1mA / 240VAC

Protection

• Overload: 105 ~ 150% rated output power
• Protection type: Constant current limiting, recovers automatically after fault condition is removed
• Over Voltage: 31.2 ~ 36V
• Protection type: Shut down o/p voltage, re-power on to recover
• Over Temperature: Shut down o/p voltage, auto-recovery or re-power on to recover

Function

• DC OK Active Signal: Relay contact rating (max.): 30V/1A resistive

Safety & EMC

• Safety Standards: UL508, TUV EN60950-1 approved
• Withstand Voltage: I/P-O/P:3KVAC; I/P-FG:2KVAC; O/P-FG:0.5KVAC
• Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25°C/70% RH
• EMC Emission: Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3
• EMC Immunity: Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A

Environmental Characteristics

• MTBF: 346.000 h
• Weight: 0,42 kg
• Dimensions (W x D x H): 55mm x 90mm x 100mm
• Operation Temperature: -10°C ~ 60°C (Refer to output load derating curve)
• Storage Temperature: -40°C ~ 85°C
• Humidity: 20% to 90% while working; 10% to 95% storage
• Vibration: Component: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6

Warranty: 36 months

ORDERING INFORMATION: MDR-100-24

---