EISK5-GTH

5-port Industrial Plug and Play Diagnostic Switch for Protocol Debugging.

Skorpion Diagnostic Switches assist the user in troubleshooting Ethernet networks by allowing a network sniffer such as Wireshark® to attach to an unused port on the switch and observe all traffic on the network. Skorpion Diagnostic Switches retain all the features of an unmanaged switch but perform like a repeating hub where all received messages are flooded to all other ports.

The Skorpion Diagnostic Switch retains all the virtues of switched Ethernet technology such as variable data rates on individual segments, auto-negotiation, Auto-MDIX but with one exception-no address learning. All messages-directed, multicast, and broadcast-are flooded to all ports on the switch allowing a sniffer or protocol analyser tool such as Wireshark the ability to observe all traffic on the network. The Skorpion Diagnostic Switch can be permanently installed on an installation or replaced with a regular Skorpion switch once a system is commissioned. This device can also be useful when developing embedded Ethernet devices because you can connect the Skorpion Diagnostic Switch between two embedded Ethernet devices and view their messages using Wireshark®. The Skorpion Diagnostic Switch can be used for control panel installations where one needs the ability to diagnose problems in the field. It can also be used in a development environment when debugging code. A metal DIN-rail clip attached to the aluminum enclosure can survive the toughest installation. A writable side label allows the installer an opportunity to document field cabling locations right on the unit.

Features:

• Plug-and-Play operation
• 5 10/100/1000BaseT(X) Ethernet ports
• Shielded RJ-45 connectors
• Auto-negotiation of speed and duplex
• Auto-MDIX supports cable inversion
• DIN-rail mounting
• Rugged metal enclosure
• 24 VAC/VDC powered

Specification:

Ethernet Communications

• IEEE 802.3 10/100/1000 Mbps data rate using RJ-45 connectors, 100 m (max)
• Supports jumbo frames up to 9216 bytes

LEDs

• Power: Green = power OK
• "H" LEDs:
• Green = 1000 Mbps communication established
• Yellow = 100 Mbps communication established
• "L" LEDs:
• Yellow = 10 Mbps communication established
• "H" or "L" LEDs: Flashing = data transmissions occurring

Power

• 10–36 VDC 3 W or 24 VAC ±10% 5 VA 47–63 Hz

Envrionmental

• Operating temperature: 0°C to 60°C
• Storage temperature: -40°C to 85°C
• Relative Humidity: 10–95%, non-condensing

Mechanical

• Dimensions: 100 mm x 26 mm x 70 mm
• Shipping weight: 0.45 kg
• IP protection: IP30
• Mounting: TS-35 DIN Rail

Certificates:

• CE Mark; CFR 47, Part 15 Class A; RoHS
• UL 508 Industrial Control Equipment

Manufacturer's warranty: 5 years

---