EISK8P-GT
5-10 days
Industrial Unmanaged Ethernet PoE Switch with 4 Gigabit Ethernet ports and 4 Gigabit Ethernet PoE ports.
The EISK8-GT Skorpion Gigabit Switch is a 8-port unmanaged Ethernet switch that provides Gigabit Ethernet (GigE) performance on all ports and Power-Over-Ethernet (PoE) on 4 ports. In addition, GigE jumbo frames up to 9216 bytes are supported for the highest possible system performance. For 10/100 Mbps legacy devices, its port speed automatically slows - accomodating any Ethernet automation system. This low-cost compact unit utilizes a rugged metal enclosure and is intended for installation in control panels using DIN-rail mounting. Ports 5 - 8 PoE provide data and power over one Cat5e cable. The unit acts as power sourcing equipment (PSE) - supplying up to 15.4W per port for IEEE 802.3af-compliant powered devices (PD). PoE eliminates the need for additional power supplies for Ethernet-enabled devices placed in challenging locations, such as wireless access points or IP cameras mounted out of reach or outdoors. PDs can be located up to 100 meters from the switch.
This plug-and-play Ethernet switch requires no configuration. All ports automatically configure their data rate and duplex using the Auto-negotiation protocol. Depending on the capability of the link partner, communication is set at 10, 100 or 1000 Mbps and at either half- or full-duplex. Each port will accommodate either a straight-through or crossover cable by using the Auto-MDIX protocol.
Features:
- Plug-and-Play operation
- 4 10/100/1000BaseT(X) Ethernet ports and 4 10/100/1000BaseT(X) Ethernet PoE ports
- Shielded RJ-45 connectors
- Auto-negotiation of speed and duplex
- Auto-MDIX supports crossover cables
- DIN-rail mounting
- Rugged metal enclosure
- 48VDC powered
Specification:
Ethernet Communications
- IEEE 802.3 10/100/1000 Mbps data rate using RJ-45 connectors, 100 m (max)
- Supports jumbo frames up to 9216 bytes
LEDs
- Power: Green = power OK
- 48V: Green = 48V PoE power OK
- Fault: Red = PoE power fault
- "H" LEDs:
- Green = 1000 Mbps communication established
- Yellow = 100 Mbps communication established
- "L" LEDs:
- Yellow = 10 Mbps communication established
- "H" or "L" LEDs: Flashing = data transmissions occurring
Power
- Input voltage: 48 VDC
- Power consumption:
- All PoE ports used: 62W
- No PoE ports used: 5W
- PoE: 48VDC, 15.4W (12.95W minimum after 100m of Cat5e cable)
Envrionmental
- Operating temperature: 0°C to 60°C
- Storage temperature: -40°C to 85°C
- Relative Humidity: 10–95%, non-condensing
Mechanical
- Dimensions: 131 mm x 41 mm x 96 mm
- Shipping weight: 0.45 kg
- IP protection: IP30
- Mounting: TS-35 DIN Rail
Certificates:
- CE Mark; CFR 47, Part 15 Class A; RoHS
- UL 508 Industrial Control Equipment
Manufacturer's warranty: 5 years
General technical parameters | |
Ethernet | 4x 10/100/1000BaseT(X), 4x 10/100/1000BaseT(X) PoE |
Industrial grade | |
Casing | Metal |
IP rating | IP30 |
Operating temperature | 0°C to 60°C |
Input voltage | 48VDC |
Manufacturer's warranty | 5 years |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!
Tags:
eisk8p
, unmanaged
, power
, over
, ethernet
, contemporary
, controls
, EISK8P-GT
, Unmanaged
, Power-over-Ethernet (PoE)