Menu
Your Cart

SDM-16O-PNP

SDM-16O-PNP
SDM-16O-PNP
SDM-16O-PNP
2-3 days
SDM-16O-PNP
SDM-16O-PNP
SDM-16O-PNP
SDM-16O-PNP
  • Stock: 2-3 days
  • Brand: Aspar
  • Model: SDM-16O-PNP
664,45 zł

Industrial expansion module, 16 PNP digital outputs on Modbus RTU, with RS485 interface.

Features:

  • OUTPUT: 16 digital outputs PNP
  • INPUT: RS485 - Modbus Slave (ASCII, RTU)
  • Mount: DIN rail
  • Default (configurable) output states when power is turned on
  • PNP type outputs with maximum current up to 0.5A
  • Built-in protection diode - Inductive loads without additional protection (contactors, relays, pneumatic and low power hydraulic solenoid valves)
  • LEDs for signaling the status of outputs, module power and transmission
  • Galvanic isolation of outputs
  • Watchdog function
  • Large, convenient cable connectors (up to 2.5 mm2)
  • Configuration: free software
  • Housing height: 62mm
  • 2 years warranty
  • Made in Poland

The SDM-16O-PNP is an innovative device that provides a simple and inexpensive extension of the output lines of popular PLCs.

The module communicates with all commercially available PLCs, devices that support the popular MODBUS MASTER protocol.

The device has 16 digital outputs in PNP logic. Outputs are isolated from logic using optocouplers. Each channel can be individually configured.

The SDM-16O-PNP is connected to the RS485 bus via two wires. Communication is made using the MODBUS RTU or MODBUS ASCII protocol. The use of a 32-bit ARM core processor provides fast data processing and fast communication. The transmission speed is configurable from 2400 to 115200.

The module is designed for mounting on DIN rail according to DIN EN 5002.

The module is equipped with a set of LEDs (indicators) used to indicate the status of outputs, module power and transmission, useful for diagnostic purposes and for helping to find errors.

Configuration of the module is done via USB with a dedicated computer program. It is also possible to change parameters using the MODBUS protocol.


General technical parameters
Serial port 1x RS-485
I/O 16x digital output
Protocol support Modbus RTU, Modbus ASCII
Industrial grade
Optoisolation 1500V
Operating temperature -10°C to 50°C
Input voltage 10~30VDC, 10~28VAC
Manufacturer's warranty 2 years
Mount DIN rail

Write a review

Note: HTML is not translated!
Bad Good
1

We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!

We use cookies to offer you the best experience on our site. By continuing to browse the site, You are agree to use cookies.