2-3 days
Industrial expansion module, 6 relay outputs on Modbus RTU, with RS485 interface.
Features:
- OUTPUT: 6 relay outputs
- INPUT: RS485 - Modbus Slave (ASCII, RTU)
- Mount: DIN rail
- Default (configurable) output states when power is turned on
- Outputs both NO and NC type
- Maximum current 5A 250V AC
- Maximum current 10A 24V DC
- Large, convenient cable connectors (up to 2.5 mm2)
- Galvanic isolation of outputs
- Configuration: free software
- Housing height: 62mm
- 2 years warranty
- Made in Poland
The SDM-6RO is an innovative device that provides a simple and inexpensive extension of high current output currents.
The module communicates with all commercially available PLCs, devices that support the popular MODBUS MASTER protocol.
The device has 6 relay outputs. Each relay has 3 pins: common (C), normally open (NO) and normally closed (NC), making the device very flexible.
This module is connected to the RS485 bus via two wire twisted pair. Communication is made using the MODBUS RTU or MODBUS ASCII protocol. The use of a 32-bit ARM core processor provides fast data processing and fast communication. The transmission speed is configurable from 2400 to 115200.
The module is designed for mounting on DIN rail according to DIN EN 5002.
The SDM-6RO is equipped with a set of LEDs used to indicate the status of outputs useful for diagnostic purposes and to assist in finding faults.
Configuration of the module is done via USB with a dedicated computer program. It is also possible to change parameters using the MODBUS protocol.
General technical parameters | |
Serial port | 1x RS-485 |
I/O | 6x relay output |
Protocol support | Modbus RTU, Modbus ASCII |
Industrial grade | |
Operating temperature | -10°C to 50°C |
Input voltage | 10~30VDC, 10~28VAC |
Manufacturer's warranty | 2 years |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!