NP314T-4D(3IN1) - Industrial Device Server with 4 Serial ports + 2 Ethernet

Industrial Device Server with 4 Serial ports and 2 Ethernet ports.

The NP3XXT 3IN1 series are serial-to-Ethernet device servers that enable the serial device to have networking capabilities immediately. They support 4/8-port RS-232/485/422 serial port and 1/2-port 10/100Base-T(X) Ethernet interface optional. The serial device server can easily and centrally manage distributed serial devices and hosts through the network, support TCP, UDP, ARP, ICMP, HTTP, DNS and DHCP protocols, support virtual serial port driver access and network interrupts automatic recovery connection.

The NP3XXT 3IN1 series provide a powerful Windows platform-based management configuration tool and WEB management interface, which can guide the user to manage the device step by step. All the devices can be configured through the network or serial port, support gateway, cross-routing communication, user-friendly IP Address, server and client mode, packet size, and so on. Through a simple set of serial devices can be achieved immediately network. The exterior design supports wall-mounted installation for ease of use.

Features:

• Supports 4 RS-232/485/422 serial ports
• 2 10/100Base-T(X) Ethernet ports
• Supports 300bps~115200bps non-blocking communication
• Supports TCP, UDP, ARP, ICMP, HTTP, DNS and DHCP protocols
• Supports TCP Server, TCP Client, UDP Server, UDP Client, UDP Multicast, UDP Rang, Pair Slave, Pair Master and Real Com working mode
• Supports cross-gateway and cross-router communication
• Supports the polling mode and FIFO function
• Supports delimiter matching communication
• Compatible with a variety of virtual serial port management software
• Supports for standard TCP/IP SOCKET application access
• Supports Windows serial driver mode
• Supports virtual serial COM port access
• Supports network interruption automatic recovery
• Provides easy-to-use, configurable Windows configuration tools for bulk installation
• Supports WEB and serial port and other forms of configuration
• Low power design, IP30 level protection
• Metal shell, wall mount installation
• Wide range working temperature from -40°C ~ 75°C

Specification:

Ethernet port

• Standard: 10Base-T, 100Base-TX
• Protocol: support TCP, UDP, APR, ICMP and DHCP
• Signal: Rx+, Rx-, Tx+, Tx-
• Rate: 10/100Mbps
• Working mode: full and half duplex
• Operating mode: TCP Server, TCP Client, UDP Server, UDP Client, UDP Multicast, UDP Rang, Pair Slave, Pair master and Real Com working mode
• Connector: RJ45

Serial port

• Serial port number: 4 RS-232/485/422 ports
• RS-485 signal: D+, D-, GND
• RS-422 signal: T+, T-, R+, R-, GND
• RS-232 signal: DSR, RTS, GND, TXD, RXD, DCD, CTS, DTR
• Parity bit: None, Even, Odd, Space, Mark
• Data bit: 5bit, 6bit, 7bit, 8bit
• Stop bit: 1bit, 1.5bit, 2bit
• Baud rate: 300bps~115200bps
• Direction control: RS-485 using data flow automatic control technology
• Load capacity: support 32 point polling environment (customizable 128 points)
• Connector: RJ45

Transmission distance

• Twisted-pair: 100m (standard CAT5/CAT5e cable)
• Serial port:
• RS-485/422: 1200m
• RS-232: 15m

Indicator

• Operation indicator: RUN
• Power indicator: PWR
• Ethernet Link/Act indicator: LINK
• RS-232/485/422 port transmit data indicator: TX
• RS-232/485/422 port receive data indicator: RX

Power supply

• Input voltage: 12~48VDC
• No-load consumption: 2.16W@12VDC
• Full-load consumption: 3.00W@12VDC

Environmental

• Working temperature: -40°C ~ 75°C
• Storage temperature: -40°C ~ 85°C
• Relative humidity: 0% ~ 95% (no condensation)

Mechanical

• Shell: IP30 protection grade, metal shell
• Installation: wall mount
• Weight: 580g
• Size (LxWxH): 170.0 mm x 110.0 mm x 31.5 mm

Industry Standards

• EMI: FCC Part 15, CISPR (EN55022) class A
• EMS:
• IEC 61000-4-2 (ESD), Level 4
• IEC 61000-4-4 (EFT), Level 3
• IEC 61000-4-5 (Surge), Level 3
• Vibration: IEC 60068-2-6
• Shock: IEC 60068-2-27
• Free fall: IEC 60068-2-32

Warranty: 5 years

Certificates: CE, FCC, RoHS, UL508 (pending)

---