I-2533CS-A CR
2-3 weeks
Industrial CAN to Fiber Converter, 1 single mode, SC connector.
The I-2533CS series is a local CAN bridge used to establish a connection between two CAN bus system via single mode fiber optic transmission medium. In order to solve the problem between CAN and fiber transmission medium, the I-2533CS series is specially designed for converting the electrical CAN bus signal to fiber optic cables. Besides, the I-2533CS-A/B supports Wavelength Division Multiplexing (WDM) technology so that only a single fiber cable is needed for transmitting bi-directional CAN data. As the I-2533CS-A and I-2533CS-B must be paired because of hardware limitations, this means that the cost of deploying fiber cable can be effectively reduced.
I-2533CS series has three more important features. First, the transmission distance limitation of the CAN bus system will not affected due to the different CAN baud rate. It means that the total CAN bus working distance can be extended. Second, the bus error on one CAN network will not affect the operation of another CAN network. Finally, the two CAN network can communication with each other by using different CAN baud rate for highly flexibility.
Features:
- Fiber Type: SC; Single mode; 100 Base-FX
- Maximum transmission distance up to 15km at any CAN baud rate
- 2500 Vrms isolation on the CAN side
- Supports both CAN 2.0A and CAN 2.0B
- Fully compatible with the ISO 11898-2 standard
- DIN-Rail mount
- Allows user-defined CAN baud rate
Manufacturer's warranty: 12 months
General technical parameters | |
CAN ports | 1x CAN |
Fiber mode | Single-mode |
Fiber | 1x 10/100Base-FX |
Protocol support | CAN |
Industrial grade | |
Optoisolation | 3000VDC |
Operating temperature | -25°C to 75°C |
Input voltage | 10~30VDC |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!
Tags:
2533cs
, fiber
, j1939
, devicenet
, icpdas
, I-2533CS-A
, to fiber
, to CAN
, J1939 & DeviceNet