INBACMBM3K00000

Modbus RTU or TCP to BACnet INBACMBM3K00000 Gateway 3000 points.

Integrate any Modbus RTU or TCP Slave device, or both at the same time, with a BACnet BMS or any BACnet IP or BACnet MS/TP controller. It fulfills B-AAC BACnet profile. BTL approved.

Specification:

Ports:

• Port A:
• 1x Serial EIA485 Plug-in screw terminal block (2 poles) A, B
• 1x Plug-in screw terminal block green (2 poles); SGND (Reference ground or shield); 1500VDC isolation from other ports
• Switch A:
• 1x DIP-Switch for serial EIA485 configuration:
• Position 1: ON: 120 Ω termination active/Off: 120 Ω termination inactive
• Position 2-3: ON: Polarization active/Off: Polarization inactive
• Port B:
• 1x Serial EIA232 (SUB-D9 male connector); Reserved for future use
• 1x Serial EIA485 Plug-in screw terminal block (3 poles); A, B, SGND (Reference ground or shield); 1500VDC isolation from other ports
• Switch B:
• 1x DIP-Switch for serial EIA485 configuration:
• Position 1: ON: 120 Ω termination active/Off: 120 Ω termination inactive
• Position 2-3: ON: Polarization active/Off: Polarization inactive
• Ethernet: 1x Ethernet 10/100 Mbps RJ45

Power:

• Connector: 1x Plug-in screw terminal block (3 poles)
• Input Voltage: 9 to 36VDC +/-10%, Max.: 140mA; 24VAC +/-10% 50-60Hz, Max.: 127mA; Recommended: 24VDC

LED indicators:

• 2x Run (Power)/Error
• 2x Ethernet Link/Speed
• 2x Port A TX/RX
• 2x Port B TX/RX
• 1x Button A indicator
• 1x Button B indicator

Mechanical Characteristics:

• Construction: Plastic, type PC (UL 94 V-0)
• Dimensions: 90mm x 88mm x 56mm
• Color: Light Grey. RAL 7035
• Protection: IP20 (IEC60529)
• Mounting:
• Wall
• DIN rail EN60715 TH35

Environmental Characteristics:

• Operation Temperature: 0°C to 60°C
• Humidity: 5% - 95%, non condensing

Warranty: 36 months

The INBACMBM3K00000 old device code is IBOX-BAC-MBM

---