FL45
Shipping 24h
Test for Free!
Surge protector for RJ45 signal, limit voltage 40V, working temperature range from -20°C to 60°C.
The FL45 features high-performance surge arresters, which feature clamping voltage and low loss over high-speed signals because of its low capacitance. In addition, the FL45 has recognized the highest quality surge protection standards IEC61000-4-5 and ITU-TK20;K21. The FL45 is designed to protect 100Base-T local and wide area communication lines.
Features
- IEC61000-4-5 and ITU-TK20&K21
- The high response surge arresters
- Clamping voltage and low loss against high speed signal
- Designed by theory of current limited and voltage clamped, discharged to ground
- Standard: 10Base-T/100Base-TX
Specification
- Standard: 10Base-T/100Base-T standard
- 10/100M signal: IEC6100-4-5 and ITU-TK20&21
- Nominal discharge current(In): 5 KA(8/20μS)
- Working voltage: 0-5V
- Limit voltage: ≤40V
- Apply Band rate: 100Mbps
- Connector: RJ45 (F)
- The line of protection: 4 lines (1, 2, 3, 6)
- Insert consumption: ≤0.5dB
- Delay time: ≤1ns
- Working temperature: -20 to 60°C
- Storage temperature: -25 to 85°C
- Humidity: Relative humidity 5% to 95%
- No power supply needed, No consumption
- Dimensions (LxWxH): 72 mm x 42 mm x 25 mm
- Shell: Alnico
- Color: Blue
- Weight: 10g
Warranty: 3 years
Approvals: FCC, CE, RoHS approvals
Dimensions:
Tips and inspiration from our blog
28 Jun
0
16 Feb
0
08 Feb
0
16 Feb
0
-P1-250x250h.png "GW1101-1D(RS-485)")
-3-250x250w.png "GW1101-1D(RS-485)")
-DB-P(12-48VDC)-P-1-250x250h.png "GW1101-1DI(3IN1)-DB-P(12-48VDC)")
-DB-P(12-48VDC)-1-1-250x250h.png "GW1101-1DI(3IN1)-DB-P(12-48VDC)")
-250x250.jpg "GW1101-1DI(RS485)")
-TB-1-250x250h.png "GW1102-2D(RS-485)")
-TB-3-250x250h.png "GW1102-2D(RS-485)")
-DB-P(12-48VDC)-250x250.jpg "GW1102-2DI(3IN1)-DB-P(12-48VDC)")
-250x250.jpg "GW1102-2DI(RS485)")
-1-250x250h.png "GW1114-4DI(RS-485)")
-2-250x250w.png "GW1114-4DI(RS-485)")
