5-10 days
Industrial LTE router with 4 Ethernet ports, Wi-Fi hotspot and ptional dual-SIM.
F3836 LTE/WCDMA/GPRS WIFI ROUTER is a kind of cellular terminal devicethat provides large data transfer function by public LTE/WCDMA network.
It adopts high-powered industrial 32-bits CPU and embedded real timeoperating system. It supports RS232 (or RS485/RS422), Ethernet and WIFI portthat can conveniently and transparently connect one device to a cellular network,allowing you to connect to your existing serial, Ethernet and WIFI devices withonly basic configuration. It has been widely used on M2M fields, such as self-service terminalindustry, intelligent transportation, smart grid, industrial automation, telemetry,finance, POS, water supply, environment protection, post, weather, and so on.
Design for Industrial Application- High-powered industrial cellular module
- High-powered industrial 32bits CPU
- Support low-consumption mode, including sleep mode, scheduled online/offline mode, scheduled power-on/power-off mode(optional)
- Housing: iron, providing IP30 protection
- Power range: DC 5~36V
Stability and Reliability- Support hardware and software WDT
- Support auto recovery mechanism, including online detect, auto redial when offline to make router always online
- Ethernet port: 1.5KV magnetic isolation protection
- RS232/RS485/RS422 port: 15KV ESD protection
- SIM/UIM port: 15KV ESD protection
- Power port: reverse-voltage and over-voltage protection
- Antenna port: lightning protection(optional)
Standard and Convenience- Support standard RS232(or RS485/RS422), Ethernet and WIFI port that can connect to serial, Ethernet and WIFI devices directly
- Support standard WAN port and PPPOE protocol that can connect to ADSL directly
- Support intellectual mode, enter into communication state automatically when powered
- Provide management software for remote management
- Support several work modes
- Convenient configuration and maintenance interface(WEB or CLI)
High-performance- Support multiple WAN access methods, including static IP, DHCP, L2TP, PPTP,PPPOE,2G/3G/4G
- Support double link backup between LTE/WCDMA and WAN(PPPOE, ADSL)(optional)
- Support VPN client(PPTP, L2TP, IPSEC)(only for VPN version)
- Support VPN server(PPTP, L2TP, IPSEC)(only for VPN version)
- Support local and remote firmware upgrade,import and export configure file
- Support NTP, RTC embedded
- Support multiple DDNS provider service
- Support VLANs, MAC Address clone, PPPoE Server
- WIFI support 802.11b/g/n. support AP, client, Adhoc, Repeater, Repeater Bridge mode
- WIFI support WEP,WPA,WPA2 encryption,Support MAC address filter
- Support multiple online trigger ways, including SMS, ring and data. Support link disconnection when timeout
- Support APN/VPDN
- Support DHCP server and client, firewall, NAT, DMZ host , URL block, QoS, traffic statistics, real time link speed statistics etc
- Full protocol support , such as TCP/IP, UDP, ICMP, SMTP(optional), HTTP, POP3(optional), OICQ(optional), TELNET, FTP(optional), SNMP, SSHD, etc
- Schedule Reboot, Schedule Online and Offline,etc
Cellular Specification- Cellular Module: Industrial cellular module
- Standard and Band
- LTE FDD 2600/2100/1800/900/800MHz, 700/1700/2100MHz(optional)
- DC-HSPA+/HSPA+/HSDPA/HSUPA/UMTS 850/900/2100MHz, 800/850/1900/2100MHz(optional)
- EDGE/GPRS/GSM 850/900/1800/1900MHz
- GPRS CLASS 10
- GPRS CLASS 12
- Bandwidth
- LTE FDD: Download speed 100Mbps, Upload speed 50Mbps
- DC-HSPA+: Download speed 42Mbps, Upload speed 5.76Mbps
- HSPA+: Download speed 21Mbps, Upload speed 5.76Mbps
- HSDPA: Download speed 7.2Mbps, HSUPA: Upload speed 5.76Mbps
- UMTS: 384Kbps
- TX power: <23dBm
- RX sensitivity: <-97dBm
WIFI Specification- Standard: IEEE802.11b/g/n
- Bandwidth
- IEEE802.11b/g: 54Mbps (max)
- IEEE802.11n: 150Mbps (max)
- Security
- WEP, WPA, WPA2, etc
- WPS (optional)
- TX power: 20dBm(11n),24dBm(11g),26dBm(11b)
- RX sensitivity: <-72dBm@54Mpbs
Hardware System- CPU: Industrial 32bits CPU
- FLASH: 16MB(Extendable to 64MB)
- DDR2: 128MB
Interface type- WAN: 1 10/100 Mbps WAN port(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection
- LAN: 4 10/100 Mbps Ethernet ports(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection
- Serial
- 1 RS232(or RS485/RS422) port, 15KV ESD protection
- Data bits: 5, 6, 7, 8
- Stop bits: 1, 1.5(optional), 2
- Parity: none, even, odd, space(optional), mark(optional)
- Baud rate: 2400~115200 bps
- Indicator: "Power", "System", "Online", "SIM", " Local Network ", "WAN", "WIFI", "Signal Strength"
- Antenna
- Cellular: 2 Standard SMA female interface, 50 ohm, lighting protection(optional)
- WIFI: 1 Standard SMA male interface, 50 ohm, lighting protection(optional)
- SIM/UIM: Standard 3V/1.8V user card interface, 15KV ESD protection
- Power: Standard 3-PIN power jack, reverse-voltage and over-voltage protection
- Reset: Restore the router to its original factory default settings
Power supply- Standard Power" DC 12V/1.5A
- Power range" DC 5~36V
Working condition- Standby: 280~330mA@12VDC
- Communication: 325~562mA@12VDC
- Schedule Shutdown: 2.57~4.2mA@12DVC
Physical Characteristics- Housing: Iron, providing IP30 protection
- Dimensions: 207x135x28 mm
- Weight: 790g
- Operating Temperature: -35~+75ºC(-31~+167℉)
- Storage Temperature: -40~+85ºC (-40~+185℉)
- Operating Humidity: 95% (unfreezing)
Ordering information:- F3836 - 1x GPRS/WCDMA/LTE, 1x WiFi, 1x WAN, 4x LAN
- F3846 - 2x GPRS/WCDMA/LTE, 1x WiFi, 1x WAN, 4x LAN, dual-SIM with failover (active-standby)
- F3946 - 2x GPRS/WCDMA/LTE, 1x WiFi, 1x WAN, 4x LAN, dual-SIM with load balancind and bonding (active-active)
- LTE FDD 2600/2100/1800/900/800MHz, 700/1700/2100MHz(optional)
- DC-HSPA+/HSPA+/HSDPA/HSUPA/UMTS 850/900/2100MHz, 800/850/1900/2100MHz(optional)
- EDGE/GPRS/GSM 850/900/1800/1900MHz
- GPRS CLASS 10
- GPRS CLASS 12
- LTE FDD: Download speed 100Mbps, Upload speed 50Mbps
- DC-HSPA+: Download speed 42Mbps, Upload speed 5.76Mbps
- HSPA+: Download speed 21Mbps, Upload speed 5.76Mbps
- HSDPA: Download speed 7.2Mbps, HSUPA: Upload speed 5.76Mbps
- UMTS: 384Kbps
- IEEE802.11b/g: 54Mbps (max)
- IEEE802.11n: 150Mbps (max)
- WEP, WPA, WPA2, etc
- WPS (optional)
- 1 RS232(or RS485/RS422) port, 15KV ESD protection
- Data bits: 5, 6, 7, 8
- Stop bits: 1, 1.5(optional), 2
- Parity: none, even, odd, space(optional), mark(optional)
- Baud rate: 2400~115200 bps
- Cellular: 2 Standard SMA female interface, 50 ohm, lighting protection(optional)
- WIFI: 1 Standard SMA male interface, 50 ohm, lighting protection(optional)
General technical parameters | |
Ethernet | 1x 10/100BaseT(X) |
Serial port | 1x RS-232/485 |
Wireless | |
Cellular modem | 1x 4G, 1x 3G, 1x 2G, 2x 4G, 2x 3G, 2x 2G |
WiFi | 802.11 b/g/n |
Industrial grade | |
Casing | Metal |
IP rating | IP30 |
Operating temperature | -35°C to 75°C |
Input voltage | 9~36VDC |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!