INMBSPAN001I100 Panasonic Etherea bi-directional Modbus RTU RS-485 gateway for BMS
INMBSPAN001I100 is Panasonic Etherea bi-directional Modbus RTU RS-485 gateway for BMS, temp. -40…85°C.
- Stock: 5-7 days
- Brand: Intesis
- Model: INMBSPAN001I100
Full design package: User manual, CE declaration, CAD, PDF, certificates and test reports
If you're preparing technical documentation or an installation design, you can receive a complete set of design materials for this model. This is a quick way to gather the required documents for audits, acceptance, or project documentation.
- Device User Manual
- CE Declaration of Conformity (EU Declaration of Conformity)
- Mechanical Drawings – CAD (STEP/DWG) or high-quality PDF
- Additional Certificates and Test Reports (if available for the model)
Panasonic Etherea AC communication module for Modbus interface.
IntesisBox INMBSPAN001I100 enables full bi-directional monitoring and control of all operating parameters of Panasonic Etherea air conditioners from a Modbus RTU (RS-485) network.
INMBSPAN001I100 is built for projects where Panasonic Etherea AC units must be integrated into BMS, PLC, or Modbus-based supervision. By exposing AC operation through Modbus RTU registers, the gateway provides a consistent integration layer for control, feedback, and diagnostics—helping reduce engineering time and improving repeatability across multi-zone installations.
New code: INMBSPAN001I100
Technically identical product – only the name / SKU has changed.
Bi-directional communication means you can both send control commands and read back real-time feedback over Modbus RTU (RS-485 / EIA485). The gateway supports control of key AC functions such as operating mode, fan speed, and temperature setpoint, while also enabling monitoring of errors, alarms, and selected internal variables—useful for supervision, maintenance, and service workflows.
A practical advantage in real buildings is parallel local operation. INMBSPAN001I100 allows simultaneous use of infrared remote controllers, wired controllers, and Modbus RTU. This lets the automation system manage schedules, limits, or zone logic, while occupants still retain familiar local control when required.
Installation and commissioning are streamlined for field work: connect the gateway to the AC unit and set the DIP-SW accordingly. No configuration software and no external power supply are required. A consistent Modbus register mapping approach (used across AC brands) helps standardize integration and speeds up rollout across multiple projects.
- Reduced dimensions
- Fast and easy installation
- No external power supply required
- Direct connection to MODBUS RTU (EIA485). Up to 63 PA-AC-MBS-1 devices can be connected to the same network
- Direct connection to AC indoor units
- Configuration via built-in DIP switches and through Modbus RTU
- Total control and supervision
- Real-time status of internal variables of the AC unit
- Allows simultaneous use of IR remote controllers, wired controllers and Modbus RTU
- Dimensions: 93 x 53 x 58 mm
- Weight: 85 g
- Operating temperature: -40°C ~ 85°C
- Storage temperature: -40°C ~ 85°C
- Operating humidity: <95% RH, Non-condensing
- Humidity: <95% RH, Non-condensing
- Isolation voltage: 1000 VDC
- Isolation resistance: 1000 MΩ
- Modbus Media: compatible with Modbus RTU - RS485 network
With an operating range of -40°C to 85°C and 1000 VDC isolation, the gateway supports stable operation in technical environments and helps improve robustness in RS-485 networks where electrical noise, long cable runs, or potential differences may be present.
Manufacturer warranty: 36 months
Product code: INMBSPAN001I100