INWMPPAN001R000 Panasonic Wi-Fi interface for remote air conditioning monitoring and control
INWMPPAN001R000 is Panasonic Wi-Fi interface for remote air conditioning monitoring and control.
- Stock: 5-7 days
- Brand: Intesis
- Model: INWMPPAN001R000
Full design package: User manual, CE declaration, CAD, PDF, certificates and test reports
If you're preparing technical documentation or an installation design, you can receive a complete set of design materials for this model. This is a quick way to gather the required documents for audits, acceptance, or project documentation.
- Device User Manual
- CE Declaration of Conformity (EU Declaration of Conformity)
- Mechanical Drawings – CAD (STEP/DWG) or high-quality PDF
- Additional Certificates and Test Reports (if available for the model)
Panasonic ECOi and PACi air conditioners communication module with Wi-Fi interface.
The IntesisBox interface INWMPPAN001R000 enables a complete integration of Panasonic air conditioners into IP-based control systems. Compatible with ECOi and PACi models commercialized by Panasonic.
INWMPPAN001R000 is a Wi-Fi gateway designed to integrate Panasonic ECOi and PACi systems into TCP/IP control environments. The goal of this integration is remote monitoring and control from a control center using any commercial SCADA platform or monitoring software that can communicate using simple ASCII messages over a TCP/IP network. This allows HVAC supervision and command to be unified within an IP-based architecture, without building separate, proprietary integration layers on the automation side.
New code: INWMPPAN001R000
Technically identical product – only the name / SKU has changed.
The IntesisBox INWMPPAN001R000 connects to the TCP/IP network via its Wi-Fi interface and exposes the Panasonic AC system through independent control and monitoring points (registers). Units can be operated using simple ASCII messages, which simplifies driver development for integrator solutions and supports integration with BMS logic such as schedules, scenes, priorities, energy constraints, and notifications.
The integration supports control of key operating functions (On/Off, Mode, Set Temp., Fan Speed, Louver Position) as well as reading room temperature and status feedback. It also provides monitoring of errors and alarms, enabling the supervisory system to react to service events and improve maintainability in commercial buildings.
Intesis Wi-Fi modules are designed as an AC integration solution for IP environments. The ASCII protocol is intentionally easy to implement, Wi-Fi devices can be automatically discovered in the network, and Wi-Fi configuration supports both dynamic IP addressing (DHCP) and static IP addressing—depending on the site’s network policy. Installation is flexible (inside the unit, wall-mounted, or above a desk/control area), which helps with neat deployment and service access.
- Control and monitoring: On/Off, Mode, Set Temp., Room Temp., Fan Speed, Louver Position
- Powered directly from the AC system
- No cabling required between the air conditioner and the home controller
- Easy creation of new drivers for any home controller thanks to a simple IP protocol
- Automatic discovery of Wi-Fi devices installed in the Wi-Fi network
- Easy installation: hidden inside the AC unit, wall-mounted, or above a desk
- Automatic firmware updates via the configuration tool
- Wi-Fi configuration supports dynamic IP (DHCP) or static IP addresses
- AC unit status and monitoring
Manufacturer warranty: 36 months
Product code: INWMPPAN001R000