TNS5800-8P4GT-2P110

12-Port Industrial Ethernet Switch with 8 interface 100M PoE M12 and 4 connectors Gigabit Bypass M12

TNS5800 series is layer 3 industrial Ethernet switch designed for rail transit. The product conforms to the requirements of industrial standard EN50155 and EN50121. Ethernet interfaces use firm and reliable M12 connectors which can adapt to usage scenario with vibration and shock. PoE power supply conforms to IEEE802.3af/at protocol standard, and it can power device over Ethernet, thus decreasing the cable connection of powered devices. This series has 4 products. They provide 110VDC power supply input and adopt rack-mounted installation, which can meet the needs of different application sites.

The network management system supports various network protocols and industry standards, such as static routing, RIP, OSPF, VRRP, STP/RSTP/MSTP, ERPS, 802.1Q VLAN, QoS function, DHCP Server, IGMP Snooping, LLDP, port trunking, port mirroring, etc. It also possesses complete management functions, support port configuration, port statistics, port IP binding, access control, 802.1X authentication, network diagnosis, rapid configuration, online upgrade, etc.; CLI, WEB, Telnet, SNMP, SSH and other access methods can be supported. Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.

When power supply or port has link failure, ALARM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. The input power supply is two independent power supply circuits which can ensure the normal operation of the device when one power supply fails. The hardware adopts fanless, low power consumption and wide temperature design, and the external heat sink provides extraordinary heat dissipation performance. This device has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It is designed for rail transit industrial and can be widely used in systems such as train control, on-board PIS, CCTV.

Features:

• Support 4 Gigabit M12 interfaces (with 2 groups of Bypass function) and 8 100M PoE M12 interfaces
• Adopt Ring patented technology, support single ring, coupling ring, chain, Dual-homing function
• Support 2 110VDC power supply inputs
• Support IP40 protection grade
• Support -40~75°C wide operating temperature range

Specification:

Standard & Protocol:

• IEEE 802.3 for 10Base-T
• IEEE 802.3u for 100Base-TX
• IEEE 802.3ab for 1000Base-T
• IEEE 802.3x for Flow Control
• IEEE 802.1D for Spanning Tree Protocol
• IEEE 802.1w for Rapid Spanning Tree Protocol
• IEEE 802.1s for Multiple Spanning Tree Protocol
• IEEE 802.1Q for VLAN
• IEEE 802.1p for CoS
• IEEE 802.1X for 802.1X Authentication
• IEEE 802.1AB for LLDP
• IEEE 802.3af for PoE
• IEEE 802.3at for PoE+
• ITU-T G.8032 for ERPS

Management:

• SNMP v1/v2c/v3 Centralized Management of Equipment, RMON, Port Mirroring, QoS, LLDP, DHCP Server, File Management, Port Statistics, Log Information, Static ARP, PoE Management

Security:

• Classification of User Permissions, ACL, NAT, 802.1X Authentication, Radius Server Authentication, Port Alarm, Power Alarm, Storm Suppression, SSHD Configuration, Telnet Configuration, Loop Detection, Aggregation Protection, Link Flapping Protection, DHCP Snooping

Switch Function:

• 802.1Q VLAN, Port Trunking, Bandwidth Management, Flow Control, Port Isolation

Unicast / Multicast:

• Static Multicast, IGMP-Snooping, PIM-SM, PIM-SM

Redundancy Technology:

• Ring, STP/RSTP/MSTP, ERPS

Troubleshooting:

• Ping, Traceroute, Port Loopback

Routing Technique:

• VRRP, RIP, OSPF

Time Management:

• NTP

Interface:

• 100M PoE M12:10/100base-T(X), M12 (Female), 4-Pin D-Coded, automatic flow control, full/half duplex mode, MDI/MDI-X automatic detection; The single port supports up to 30W PoE power supply output. Pin 1 and 3 of PoE power supply are positive, while pin 2 and 4 are negative
• Gigabit M12: 10/100/1000Base-T(X), M12(Female), 8-Pin X-Coded, Automatic Flow Control, Full/half Duplex Mode, MDI/MDI-X Autotunning; it supports two groups of Bypass
• Alarm interface: 8-pin 5.08mm pitch terminal blocks (includes 2-pin relay) or 7-pin Male M23 interface (includes 2-pin relay), support 1 relay alarm output, the current load capability is 1A@30VDC or 0.3A@125VAC
• Console port: CLI command line management port(RS-232), RJ45

Indicator:

• Power indicator, alarm indicator, running indicator, interface indicator, PoE indicator

Switch Property:

• Transmission mode: store and forward
• MAC address: 16K
• Packet buffer size: 12Mbit
• Backplane bandwidth: 128G
• Switch time delay: <10μs

Power Supply:

• Power supply range: 110VDC (66~156VDC), dual power supply redundancy
• Connection method: 8-pin 5.08mm pitch terminal blocks (includes 6-pin power supply)
• Connection protection: anti-reverse connection

Power Consumption:

• Full load (no PoE load): <20W
• Full load (including PoE load): <120W

Working Environment:

• Operating temperature: -40~75°C
• Storage temperature: -40~85°C
• Relative humidity: 5%～95% (no condensation)

Physical Characteristic:

• Housing: IP40 protection, metal
• Installation: 1U rack mounting
• Dimension (W x H x D): 482.6mm × 44.45mm × 200mm

Industrial Standard:

EN 50121-3-2: 2016 standard, Electrostatic Discharge, Class A:

• Air discharge: ±8kV
• Contact discharge: ±6kV

EN 50121-3-2: 2016 standard, Surge, Class A:

• Power supply: common mode±2kV, differential mode±1kV

EN 50121-3-2: 2016 standard, Electrical Fast Transient Pulses, Class A:

• Power supply: ±2kV
• Signal: ±2kV

EN 50121-3-2: 2016 standard, Radio Frequency Electromagnetic, Class A:

• 80MHz~800MHz，20V/m
• 800MHz~1GHz，20V/m
• 1.4GHz~2.0GHz，10V/m
• 2.0GHz~2.7GHz，5V/m
• 5.1GHz~6GHz，3V/m

EN 50121-3-2: 2016 standard, Conducted Disturbance Induced by RF Fields, Class A:

• Power supply: 0.15MHz~80MHz, 10V
• Signal: 0.15MHz~80MHz, 10V

EN 50121-3-2: 2016 standard, Power Supply Conducted Disturbance:

• 150kHz~500kHz, 79dBμV quasi-peak value
• 500kHz~30MHz, 73dBμV quasi-peak value

EN 50121-3-2: 2016 standard, Radiation Disturbance:

• 30MHz~230MHz, <40dBμV/m quasi-peak value
• 230MHz~1GHz, <47dBμV/m quasi-peak value

Shock: IEC 61373

Free fall: IEC 60068-2-32

Vibration: IEC 61373

Authentication: CE, FCC, RoHS, EN50155, EN50121-3-2, IEC61373

Warranty: 5 years