Menu
Your Cart

MODEL277S

MODEL277S
MODEL277S
MODEL277S
MODEL277S
Shipping 24h Test for Free!
MODEL277S
MODEL277S
MODEL277S
MODEL277S
MODEL277S
  • Stock: In Stock - delivery 1-2 working days!
  • Brand: 3onedata
  • Model: MODEL277S
476,75 zł

Available Options

Industrial RS-232/485/422 to optic fiber converter, single-mode 20 km, 9-36VDC, SC/ST optional.

Model277 is one kind can offer RS-232/485/422 serial port carry transparent optical fiber modem of transmission to get end to user, no need patch cords set up, switch over automatically, and can detect and examine the signal speed automatically, zero delays time to transmit automatically.

Model277 adopt optic fiber transmit, have isolate protection, data privacy is fine, working steady, data, such threats to communication equipment as the wave is welled up and interfered with electromagnetically that the effective one has prevented the abominable environment from being struck by lightning, can work in the abominable and dangerous environment reliably.

Can be used in occasions such as various industrial control, course controlling, traffic controlling and intellectual district, especially suit the bank, electricity and interfering with environment department and system with the special requirement electromagnetically.

IMF204

Features:

  • Extend RS-232/485/422 transmission up to 120Km with single-mode
  • Transmit asynchronously, point to point, speed reach 500Kbps
  • Examine signal speed automatically, zero delay time
  • Plug-and-Play (hot-pluggable, data format auto-sensing & self-adjusting)
  • Support RS-232/485/422 interface type, but only one RS-232/RS-485/RS-422 port can be connected at a given time
  • 9~36VDC power supply input (2 bit terminal block)

Specification:

RS-232/485/422

  • Standards: EIA RS-232C, RS-485, RS422 standard
  • RS-232 signal: OUT(TX), IN(RX), GND
  • RS-422 signal: T+, T-, R+, R-, GND
  • RS-485 signal: D+, D-, GND
  • Working mode: Asynchronism, point to point or multi point, 2 wire half-duplex, 4 wire full duplex
  • Baud rate: 0~115.2Kbps, auto test serial signal rate detect signal speed automatically, zero delay time
  • Transfer distance:
    • RS-485/422 side: 1.2Km (9600bps)
    • RS-232 side: no less than 5m
  • Max number of drops: 128 nodes (RS-485/422)
  • Port protection:
    • 600W surge protection
    • 15KV ESD protection

Fiber Optic

  • Connectors: SC, FC or ST, optional
  • Fiber optic cables:
    • Single Mode: 8.3/125, 8.7/125, 9/125 or 10/125 um
    • Muti-Mode: 50/125, 62.5/125 or 100/125 um
  • Transmission:
    • Single-mode: 20, 40, 60, 80, 100, 120km
    • Multi-mode: 2km optional
  • Wavelength: 850nm, 1310nm, 1550nm

Power

  • Power input: 9 ~ 36VDC power input (2 bit terminal block)
  • Consumption: 120mA

Environment

  • Operating temperature: -40°C to 75°C
  • Storage temperature: -40°C to 85°C
  • Humidity: 5% to 95% (no condensation)

Appearance

  • Dimensions: 100.0 mm x 69.0 mm x 22.0 mm
  • Material: Iron(shell)
  • Color: White
  • Weight: 230g

Manufacturer's warranty: 5 years

Approvals: FCC, CE, RoHS approvals

Dimensions:


General technical parameters
Serial port 1x RS-232/422/485
Fiber mode Single-mode
Fiber 1x 10/100Base-FX
Industrial grade
Surge protection 600W, 15KV ESD
Casing Metal
Operating temperature -40°C to 75°C
Input voltage 9~36VDC
Certificates & standards FCC, CE, RoHS
Manufacturer's warranty 5 years

Write a review

Note: HTML is not translated!
Bad Good
1

We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!

We use cookies to offer you the best experience on our site. By continuing to browse the site, You are agree to use cookies.