MODEL485P

RS232 to RS485/422 converter, 2500V isolation, 9VDC.

The Model485P is a high performance, multifunctional RS-232/485/422 interface converter. The product configure out connect power, optic-electrical isolation more than 2.5KV. Have small volume, far transmission distance, high rate, steadily performance and so on. It is abroad used in industry control system, It is an interface convert product that have good between performance to price. Adopt itself adapt interface technique, no use for setup switch. Alternative offer for TCC-100I.

Features:

• 9VDC power input, 2500V optical isolation
• Plug-and-Play (hot-pluggable, data format auto-sensing & self-adjusting)
• Data direction auto-turnaround, no flow control is necessary
• 1500W surge protection, 15KV ESD protection
• 1800m transfer distance (115200bps)
• RS-485/RS-422 connector RJ45, DB9M or 5 bit terminal block

Specification:

Interface:

• Standards: EIA RS-232C, RS-485, RS422
• RS-232 signal: TX, RX, GND
• RS-422 signal: T+, T-, R+, R-, GND
• RS-485 signal: D+, D-, GND
• Working mode: Asynchronic, point to point or multi point, 2 wire half-duplex, 4 wire full duplex
• Baud rate: 300~115200bps, auto test serial signal rate detect signal speed automatically, zero delay time
• Flow control: Data direction auto-turnaround, no flow control is required
• Transfer distance:
• RS-485/422 side: 1.8Km, 115200bps
• RS-232 side: no less than 5m
• Max number of drops: 128 nodes
• Optical isolation: 2500V
• Port protect: 1500W surge protection, 15KV ESD protection

Power:

• Power input: 9VDC power input
• Consumption: Static less than 120mA, dynamic less than 350mA

Environment

• Operating temperature: -20°C to 60°C
• Storage temperature: -40°C to 85°C
• Humidity: 5% to 95% (no condensation)

Appearance

• Dimensions: 93.0 mm x 62.4 mm x 22.0 mm
• Material: Iron (shell)
• Color: White
• Weight: 200g

Manufacturer's warranty: 5 years

Approvals: FCC, CE, RoHS

---