Menu
Your Cart

CuSn/M Flex 1,8/3kV

CuSn/M Flex 1,8/3kV
To be confirmed
CuSn/M Flex 1,8/3kV
Product Views: 4515
0,00 zł

Cross-linked halogen-free single-core cable.

Intended for use as power cables for transmission of electricity in rolling stock in rail vehicles (locomotives, trains, trolleybuses, etc.) with a high concentration of people and property. Installations in cable ducts, tubes and pipes. Special application for installations where there are increased requirements for fire protection and where low emission of fumes and corrosive gases during combustion is required.

Construction:

  • Wire: Copper, tinned flexible class 5 wire according to IEC 60228
  • Separator: Optional halogen-free tape
  • Insulation: XLPO-HFFR halogen-free cross-linked material type EI 109 according to EN 50264-3-1

Characteristic:

  • Insulation color: black
  • Maximum temperature of the wire during cable operation: +90°C
  • The minimum ambient temperature for permanently laid cables: -40°C
  • The minimum ambient temperature when laying cables: -5°C
  • Maximum core temperature during short circuit: +200°C, EN 50264-1 pkt. 1
  • The minimum bending radius: 5 x D, D – diameter of the cable
  • Compliance with the requirements of EN 45545-2 - HL3
  • Resistance to oil, diesel, ozone, UV

Reaction to fire:

  • Resistance to flame spread: EN 50264-1, IEC 60332-1-2, IEC 60332-3-24
  • Fume emission during combustion: IEC 61034-2: light transmission > 70%
  • Separation of corrosive gases during combustion:
    • IEC 60754-1, IEC 60754-2: pH ≥ 4,3
    • conductivity ≤ 100 μS/cm
  • Toxicity index: EN 50305: CIT<6%

Complies with: EN 45545 - HL3, EN 50264-3-1, IEC 60228


Industrial grade
Operating temperature to 90°C
Cable parameters
Minimum bending radius 5D
Core Copper
Insulation XLPO, HFFR
Installation temperature -5°C to 90°C
Maximum short circuit temperature 200°C
Standard packaging On drums
Minimum ambient temperature -40°C
Resistance to flame spread EN 50264-1, IEC 60332-1-2, IEC 60332-3-24
Fume emission during combustion IEC 61034-2
Number of wires in the cable Single-core
Outer diameter [mm] 5.7, 6.2, 6.7, 7.2, 8.2, 9.3, 10.5, 11.5, 13.2, 15.0, 17.5, 18.6, 20.4, 23.1, 24.6
Cable weight [kg/km] 46, 59, 75, 97, 140, 200, 283, 376, 519, 709, 932, 1160, 1425, 1736, 2229

Write a review

Note: HTML is not translated!
Bad Good
We use cookies to offer you the best experience on our site. By continuing to browse the site, You are agree to use cookies.