3-4 days
MBus to RS-232 - Converter (for Analog Modem connection, Master MBus: up to 250 slaves), housing type B (wide), DIN rail mount.
This series allows to comunicate with the Slaves M‐bus remotely, using an Analog Modem or a GSM Modem. Moreover it is possible to connect directly to the device using a Null‐Modem serial cable. Converter is easy to configure thanks to free SW67023 software.
Characteristics:
- European standard EN 1434
- Microprocessor control
- Converter allows to connect up to 250 MBus Slaves
- Galvanic isolation between RS232 (Modem connection) and M‐Bus
- Baud Rate and Parity changeable with software
- Mountable on 35mm DIN Rail
- Settable transmission speed from 300 to 38400 b/s
Specifications:
- Ports: 1x MBus; 1x RS-232
- Data Rates MBus: Up to 38400 bps
- Data Rates RS-232: Up to 115200 bps
- Power supply: 15...21VAC; 18...35VDC
- Operating temperature: -40°C/+70°C (-40°F/+158°F)
- Dimensions: 106 mm x 60 mm x 95 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: DIN Rail mount
- Software: SW67023
- ORDER CODE: HD67023-B2-250
Configurator - Software SW67023 FREE DOWNLOAD
Manufacturer's warranty: 24 months
MBus (Meter-Bus) is an European standard for remote reading of wide range of consumption meters. As long as MBus has both physical and application layer in most cases there is a need for external protocol/electrical layer converter to read MBus meter. Converters with MBus interface are used to read the data from gas meters, energy meters, water meters and others.
General technical parameters | |
Serial port | 1x RS-232 |
M-Bus master | up to 250 slaves |
Protocol support | M-Bus |
Industrial grade | |
Operating temperature | -40°C to 70°C |
Input voltage | 15~21VAC, 18~35VDC |
Manufacturer's warranty | 24 months |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!